Kamis, 31 Oktober 2013

Lowongan migas di Supraco Indonesia, 6 posisi

PT. SUPRACO INDONESIA Jakarta based company with more than 33 years of experience in providing services to oil and gas industry and Geothermal in Indonesia. We are seeking for best candidates to fill the vacant position for our projects 1. Civil Inspector – Field Facilities (CP-A283) REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES • Minimum fifteen (15) years experience in inspection of Civil QA/QC activities out of which at least 5 years in client position . • Possess leadership qualities with a good analytical mind to manage the team of contractor QC personnel • A self starter with proactive approach in foreseeing problems and setting in motion the corrective actions • S1 graduate or equivalent with a good communication capability in Bahasa Indonesia and English • Knowledge on International standards like ASCI, AWWA etc., and the material testing methods • Experienced in witnessing the tests at the laboratories • Possess experience to conduct regular spot checks / spot audits on the on going civil activities at site and implement corrective actions as required • Experienced in witnessing the fabrication and installation of civil steel structures • Experienced in inspection of civil road construction works, culverts, fly over / over pass • Experienced in civil building inspection works, inclusive of associated architectural / interior decoration works Placement : Cepu Site 2. Welding Inspector (CP-A284) RESPONSIBILITY AND DUTIES: • Assist reviewing WPS, WQT records and welding inspection related QC documents • Witness and oversee daily activities and related inspection activities in piping, structural, mechanical, and E&I disciplines. This includes visual and NDT checks like RT, MT, PT and UT. • Witness / monitor NDT activities, and interpret / review NDT reports on RT, MT, PT and UT • Monitor and inspect exotic material welding works (DSS, SDSS and CRA) inclusive of PMI and ferrite checks • Monitor in-process welding parameters like fit up, purging and purging level (O2 checking), heat input and maintenance of inter-pass temperature, passivation activities, flushing, etc. • Monitor welder performance continuously, set in motion the corrective actions when the quality levels / trend is not in acceptable levels • Monitor welding consumable handling on site, and conduct daily spot checks in the field to ensure proper handling of welding consumables. Review original welding consumable material certificates for compliance to codes and specifications where required. • Monitor / surveillance of material traceability in weldments • Witness / monitor weld repair activities and welding distortion correction activities • Ensure testing, measuring, welding, and NDE equipment is fully calibrated and has current certification • Verify fabrication fit-up, alignment, and dimensional tolerances • Participate in line walk before hydro test, preparation of punch lists and follow up of the same for close out • Witness piping hydrotest and flushing works, witness reinstatement checks for final acceptance • Witness Nitrogen (N2) leak tests on piping systems • Witness furnace PWHT and Local PWHT of piping works • Verify Contractor, Subcontractor Quality management systems, plans, procedures, and processes are in place. Implement Project Construction Surveillance Program REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES: • Have minimum of 15 years in welding inspection activities working to international standards like ANSI B31.3 / API 650 / ASME Sec IX / Norsok / NACE RP 0175. Possess Minimum CSWIP 3.1 or AWS CWI welding inspector qualifications. • Possess ASNT NDT L-II in RT / MT / PT / UT and able to review radiographs to various international standards. • Possess a proactive approach plus willingness to closely monitor and educate the exotic alloy welders • Experience in welding and inspection of exotic alloys like Duplex SS / Super Duplex SS / Inconel 825 is mandatory and highly preferred • Knowledge on purging and maintenance of heat input / interpass temperature required. Familiar with PMI (P-met) / Ferrite checking and review of these reports for compliance. • Experience in working on oil and gas projects involving sour oil service is preferred • Able to read and understand P&IDs, isometrics and GA drawings, both engineering and shop drawings • Able to review PWHT charts and conduct in process spot checking • Able to review hydrotest packs, witness hydrotests and reinstatement works for system acceptance • Experienced in Nitrogen leak tests preferred • Thorough understanding of applicable industry specifications • Native tongue in Bahasa Indonesia with proficiency in spoken and written English language skills for official works preferred. Familiar with Microsoft Office suite of software programs, Lotus Notes, etc. Well versed in safe work practices including co-ordination with contractors on ensuring radiation safety Placement : Cepu Site 3. E&I Construction Tech Foreman – Field Facilities (CP-A285) RESPONSIBILITY AND DUTIES: • monitor construction and fabrication of E&I activities conducted at Contractors / Sub-Contractors facilities and in the field • Participate in receiving inspection of E&I items at site and monitor the preservation program for the same until hand over • Promote safety awareness and safe performance among project team members, including consultants and contractor personnel • Support Construction Site Manager in monitoring and appraising the contractor’s performance for safety, quality, cost, and schedule; ensure that appropriate corrective actions are taken when needed • Verify physical progress • Monitor mechanical acceptance and start-up activities between operating unit and contractor • Assist PMT in meeting OIMS expectations as required, especially OIMS Element 2 (Risk Assessment), OIMS Element 3 (Facility Design & Construction), OIMS Element 9 (Incident Investigation) and OIMS Element 10 (Community Awareness) • Review or assist in reviewing E&I QC documents such as QA plans and pre-commissioning procedures • Jointly develop E&I inspection check lists or review the check lists generated by the Contractor for compliance to project requirements • Ensure quality processes are followed for instrument calibration at contractor facilities and / or in the field for permanent project materials and temporary test instruments / equipments used in E&I construction works • Co-ordinate with Contractor and Quality on cable tray routing and installation inspection • Monitor construction of electrical and instrumentation facilities and ensure they are completed as per approved engineering documentation and project specifications. • Witness installation of E&I control panels (both local and inside the control rooms) • Monitor and witness continuity and meggering inspection works for cables • Monitor cable laying works in trenches, through ducts and on cable trays • Monitor loop checks and review records for the same in accordance with technical requirements • Monitor construction and installation and testing of instrument tubing works • Review Contractor’s field inspection and test reports and ensure that inspections are carried out as per approved ITP requirements • Assist and co-ordinate with other disciplines on electrical motors installation and alignments • Interface, participate or co-ordinate in E&I pre-commissioning activities as required • Preparation of punch lists • Verify Contractor / Subcontractor Quality management systems, plans, procedures, and processes are in place. Implement project Construction Surveillance Program. REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES: • Minimum ten (10) year’s experience in inspection of E&I works on major onshore construction projects out of which at least 3 years experience senior E&I construction position • Experienced in witnessing SAT (Site Acceptance Tests) and FAT (Factory Acceptance Tests) of Electrical & Instrument control systems • Exposure to DCS instrumentation works and commissioning of the same • Thorough knowledge on International standards on E&I like IEC etc. • Knowledge on applicable Indonesian MIGAS regulations for E&I works is preferred • Well versed in safe work practices • Computer literate with experience in using MS Office suite for preparing reports and maintaining data base Placement : Cepu Site 4. COATING INSPECTOR (CP-A286) RESPONSIBILITY AND DUTIES: • Verify required coating inspection methods are performed on pipeline, including DFT, holiday testing, etc. • Monitor mixing and application of coating by contractor. • Maintain daily log of activities. • Oversee application of field joint coating. REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES: • Extensive training and experience in coatings & coatings inspection, application methods & testing. • Previous training as a NACE coatings inspector is helpful. • Knowledge of surface preparation methods & other requirements for obtaining desired performance from coatings. • Seven (7) years experience in coatings & coatings inspection. • Overseas pipeline experience is helpful. • Competent in PC skills relative to Microsoft Word, Excel, and e-mail system Placement : Cepu Site 5. Procurement and Local Content Coordinator (CP-A287) RESPONSIBILITY AND DUTIES: • Follow, analyze and distribute as necessary the Domestic Content Surveyor reports • Field Experience for Project Reporting to Management with Written and Presentation • Assist Project Teams as an expert in APDN and Domestic content calculation • Provide guidance in how to improve Domestic Content realization • Support project teams in case of Contractors / subcontractors / vendors claims relating to Domestic Content • Interface with BPMIGAS as needed by the Project. Be the main contact of BPMIGAS TKDN division REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES: • College Degree • Fluent in English Read/Write/Speak and highly Communicative • Experience working in Procurement and as Domestic Content Coordinator more than 8 years • Strong knowledge of PTK 007 and TKDN requirements Placement : Jakarta / Cepu Site Base 6. Lab Inspector Soil Mechanics- Geotechnical (CP-A288) RESPONSIBILITY AND DUTIES: • Site supervision of fieldworks relating to soil mechanic and geotechnical as the result of earth works contracts ensuring compliance with specification and common practice. • Inspect the stock pile and sampling material whether from borrow site or working area. • Evaluating the result of lab test of sampling material and to be recommended countermeasures for low strength soils in conctact with structural foundations: - Proctor or CBR test - Permiability test, - Atterberg test, - Grain size distribution analysis - etc • Verify proper dam foundation slope stabilization and structures, including soil blending-mix of native and borrow materials. • Supervision of earthworks placement and field testing. • Verification dam contruction procedures are followed REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES: • Working Knowledge of: o Soil Mechanics field tesing methods, including determining Vane Shear Strengths in cohesive soils using ASTM D 2573 method and Cone Penetration Test per ASTM D3441. o Testing of swelling and dispersive soils (E.g. Emerson class number, double hydrometer or Pinhold). • Degree in Strata 1 for Civil/Geotechnical/Geological Engineering 7 years, or Strata 2 Master of Science degree 5 years of relevant experience (earth and embankment work preferred). • Well versed in safe work practices. • Computer literate with experience in using MS Office suite for preparing reports and maintaining data base • Good oral and written English language skills Placement : Cepu Site Please send your application to recruitment@supraco.com with detailed resume and recent photograph and put job title name and code on subject email.

Rabu, 30 Oktober 2013

Lowongan migas di Supraco Indonesia, 6 posisi

PT. SUPRACO INDONESIA Jakarta based company with more than 33 years of experience in providing services to oil and gas industry and Geothermal in Indonesia. We are seeking for best candidates to fill the vacant position for our projects
1. Civil Inspector – Field Facilities (CP-A283)
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES
• Minimum fifteen (15) years experience in inspection of Civil QA/QC activities out of which at least 5 years in client position .
• Possess leadership qualities with a good analytical mind to manage the team of contractor QC personnel
• A self starter with proactive approach in foreseeing problems and setting in motion the corrective actions
• S1 graduate or equivalent with a good communication capability in Bahasa Indonesia and English
• Knowledge on International standards like ASCI, AWWA etc., and the material testing methods
• Experienced in witnessing the tests at the laboratories
• Possess experience to conduct regular spot checks / spot audits on the on going civil activities at site and implement corrective actions as required
• Experienced in witnessing the fabrication and installation of civil steel structures
• Experienced in inspection of civil road construction works, culverts, fly over / over pass
• Experienced in civil building inspection works, inclusive of associated architectural / interior decoration works
Placement : Cepu Site
2. Welding Inspector (CP-A284)
RESPONSIBILITY AND DUTIES:
• Assist reviewing WPS, WQT records and welding inspection related QC documents
• Witness and oversee daily activities and related inspection activities in piping, structural, mechanical, and E&I disciplines. This includes visual and NDT checks like RT, MT, PT and UT.
• Witness / monitor NDT activities, and interpret / review NDT reports on RT, MT, PT and UT
• Monitor and inspect exotic material welding works (DSS, SDSS and CRA) inclusive of PMI and ferrite checks
• Monitor in-process welding parameters like fit up, purging and purging level (O2 checking), heat input and maintenance of inter-pass temperature, passivation activities, flushing, etc.
• Monitor welder performance continuously, set in motion the corrective actions when the quality levels / trend is not in acceptable levels
• Monitor welding consumable handling on site, and conduct daily spot checks in the field to ensure proper handling of welding consumables. Review original welding consumable material certificates for compliance to codes and specifications where required.
• Monitor / surveillance of material traceability in weldments
• Witness / monitor weld repair activities and welding distortion correction activities
• Ensure testing, measuring, welding, and NDE equipment is fully calibrated and has current certification
• Verify fabrication fit-up, alignment, and dimensional tolerances
• Participate in line walk before hydro test, preparation of punch lists and follow up of the same for close out
• Witness piping hydrotest and flushing works, witness reinstatement checks for final acceptance
• Witness Nitrogen (N2) leak tests on piping systems
• Witness furnace PWHT and Local PWHT of piping works
• Verify Contractor, Subcontractor Quality management systems, plans, procedures, and processes are in place. Implement Project Construction Surveillance Program
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• Have minimum of 15 years in welding inspection activities working to international standards like ANSI B31.3 / API 650 / ASME Sec IX / Norsok / NACE RP 0175. Possess Minimum CSWIP 3.1 or AWS CWI welding inspector qualifications.
• Possess ASNT NDT L-II in RT / MT / PT / UT and able to review radiographs to various international standards.
• Possess a proactive approach plus willingness to closely monitor and educate the exotic alloy welders
• Experience in welding and inspection of exotic alloys like Duplex SS / Super Duplex SS / Inconel 825 is mandatory and highly preferred
• Knowledge on purging and maintenance of heat input / interpass temperature required. Familiar with PMI (P-met) / Ferrite checking and review of these reports for compliance.
• Experience in working on oil and gas projects involving sour oil service is preferred
• Able to read and understand P&IDs, isometrics and GA drawings, both engineering and shop drawings
• Able to review PWHT charts and conduct in process spot checking
• Able to review hydrotest packs, witness hydrotests and reinstatement works for system acceptance
• Experienced in Nitrogen leak tests preferred
• Thorough understanding of applicable industry specifications
• Native tongue in Bahasa Indonesia with proficiency in spoken and written English language skills for official works preferred. Familiar with Microsoft Office suite of software programs, Lotus Notes, etc.
Well versed in safe work practices including co-ordination with contractors on ensuring radiation safety
Placement : Cepu Site
3. E&I Construction Tech Foreman – Field Facilities (CP-A285)
RESPONSIBILITY AND DUTIES:
• monitor construction and fabrication of E&I activities conducted at Contractors / Sub-Contractors facilities and in the field
• Participate in receiving inspection of E&I items at site and monitor the preservation program for the same until hand over
• Promote safety awareness and safe performance among project team members, including consultants and contractor personnel
• Support Construction Site Manager in monitoring and appraising the contractor’s performance for safety, quality, cost, and schedule; ensure that appropriate corrective actions are taken when needed
• Verify physical progress
• Monitor mechanical acceptance and start-up activities between operating unit and contractor
• Assist PMT in meeting OIMS expectations as required, especially OIMS Element 2 (Risk Assessment), OIMS Element 3 (Facility Design & Construction), OIMS Element 9 (Incident Investigation) and OIMS Element 10 (Community Awareness)
• Review or assist in reviewing E&I QC documents such as QA plans and pre-commissioning procedures
• Jointly develop E&I inspection check lists or review the check lists generated by the Contractor for compliance to project requirements
• Ensure quality processes are followed for instrument calibration at contractor facilities and / or in the field for permanent project materials and temporary test instruments / equipments used in E&I construction works
• Co-ordinate with Contractor and Quality on cable tray routing and installation inspection
• Monitor construction of electrical and instrumentation facilities and ensure they are completed as per approved engineering documentation and project specifications.
• Witness installation of E&I control panels (both local and inside the control rooms)
• Monitor and witness continuity and meggering inspection works for cables
• Monitor cable laying works in trenches, through ducts and on cable trays
• Monitor loop checks and review records for the same in accordance with technical requirements
• Monitor construction and installation and testing of instrument tubing works
• Review Contractor’s field inspection and test reports and ensure that inspections are carried out as per approved ITP requirements
• Assist and co-ordinate with other disciplines on electrical motors installation and alignments
• Interface, participate or co-ordinate in E&I pre-commissioning activities as required
• Preparation of punch lists
• Verify Contractor / Subcontractor Quality management systems, plans, procedures, and processes are in place. Implement project Construction Surveillance Program.
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• Minimum ten (10) year’s experience in inspection of E&I works on major onshore construction projects out of which at least 3 years experience senior E&I construction position
• Experienced in witnessing SAT (Site Acceptance Tests) and FAT (Factory Acceptance Tests) of Electrical & Instrument control systems
• Exposure to DCS instrumentation works and commissioning of the same
• Thorough knowledge on International standards on E&I like IEC etc.
• Knowledge on applicable Indonesian MIGAS regulations for E&I works is preferred
• Well versed in safe work practices
• Computer literate with experience in using MS Office suite for preparing reports and maintaining data base
Placement : Cepu Site
4. COATING INSPECTOR (CP-A286)
RESPONSIBILITY AND DUTIES:
• Verify required coating inspection methods are performed on pipeline, including DFT, holiday testing, etc.
• Monitor mixing and application of coating by contractor.
• Maintain daily log of activities.
• Oversee application of field joint coating.
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• Extensive training and experience in coatings & coatings inspection, application methods & testing.
• Previous training as a NACE coatings inspector is helpful.
• Knowledge of surface preparation methods & other requirements for obtaining desired performance from coatings.
• Seven (7) years experience in coatings & coatings inspection.
• Overseas pipeline experience is helpful.
• Competent in PC skills relative to Microsoft Word, Excel, and e-mail system
Placement : Cepu Site
5. Procurement and Local Content Coordinator (CP-A287)
RESPONSIBILITY AND DUTIES:
• Follow, analyze and distribute as necessary the Domestic Content Surveyor reports
• Field Experience for Project Reporting to Management with Written and Presentation
• Assist Project Teams as an expert in APDN and Domestic content calculation
• Provide guidance in how to improve Domestic Content realization
• Support project teams in case of Contractors / subcontractors / vendors claims relating to Domestic Content
• Interface with BPMIGAS as needed by the Project. Be the main contact of BPMIGAS TKDN division
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• College Degree
• Fluent in English Read/Write/Speak and highly Communicative
• Experience working in Procurement and as Domestic Content Coordinator more than 8 years
• Strong knowledge of PTK 007 and TKDN requirements
Placement : Jakarta / Cepu Site Base
6. Lab Inspector Soil Mechanics- Geotechnical (CP-A288)
RESPONSIBILITY AND DUTIES:
• Site supervision of fieldworks relating to soil mechanic and geotechnical as the result of earth works contracts ensuring compliance with specification and common practice.
• Inspect the stock pile and sampling material whether from borrow site or working area.
• Evaluating the result of lab test of sampling material and to be recommended countermeasures for low strength soils in conctact with structural foundations:
- Proctor or CBR test
- Permiability test,
- Atterberg test,
- Grain size distribution analysis
- etc
• Verify proper dam foundation slope stabilization and structures, including soil blending-mix of native and borrow materials.
• Supervision of earthworks placement and field testing.
• Verification dam contruction procedures are followed
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• Working Knowledge of:
o Soil Mechanics field tesing methods, including determining Vane Shear Strengths in cohesive soils using ASTM D 2573 method and Cone Penetration Test per ASTM D3441.
o Testing of swelling and dispersive soils (E.g. Emerson class number, double hydrometer or Pinhold).
• Degree in Strata 1 for Civil/Geotechnical/Geological Engineering 7 years, or Strata 2 Master of Science degree 5 years of relevant experience (earth and embankment work preferred).
• Well versed in safe work practices.
• Computer literate with experience in using MS Office suite for preparing reports and maintaining data base
• Good oral and written English language skills
Placement : Cepu Site
Please send your application to recruitment@supraco.com with detailed resume and recent photograph and put job title name and code on subject email.


Lowongan migas di NES Global Talent Indonesia

NES Global Talent Indonesia - An Oil and Gas Recruitment Consultants based in Jakarta and Head Office in Manchester UK which supplies some of the largest organizations in the world with high-quality technical and engineering experts and has supported the top names in oil & gas for over 30 years. Currently our client a multinational EPC company in Oil and Gas industry in Indonesia requires position as below:
Lead/Senior Mechanical Engineer - Corporate (Indonesian National)
Qualifications:
• Min. bachelor degree in Mechanical Engineering
• Strong technical/engineering skills with through knowledge of applicable Codes and Standards (technical and philosophy) plus a working knowledge of other discipline activities
• At least 15 years of Mechanical/Piping design and implementation experience, of which a minimum of 10 years in oil and gas facilities experience
Please submit your application with updated CV & recent photograph by e-mail to: recruiter@nesglobaltalent.com


Lowongan migas di PT PGN LNG Indonesia (PGN LNG)

PT PGN LNG Indonesia (PGN LNG) merupakan anak perusahaan PT Perusahaan Gas Negara (Persero) Tbk yang didirikan pada bulan Juni 2012 dengan tujuan mengembangkan usaha gas alam cair termasuk pencairan gas alam, penyimpanan dan pengapalan LNG, dan regasifikasi ke gas alam untuk mendukung bisnis utama PGN di bidang transportasi dan distribusi gas ke para pelanggan. Lokasi PGN LNG berada di wilayah Jakarta Selatan.
Marine Terminal Superintendent
TUGAS DAN KEWAJIBAN
1. Membuat prosedur operasi FSRU.
2. Mempersiapkan instruksi kerja untuk prosedur - prosedur operasi
3. Mempersiapkan konsep operasi dan berkoordinasi dengan pihak FSRU
4. Melakukan koordinasi dengan dirjen Hubla dalam kementrian perhubungan dalam rangka persiapan operasi (Penempatan Sarana Bantu Navigasi Pelayaran, alur pelayaran, area labuh, keselamatan pelayaran)
5. Mengidentifikasi dan mempersiapkan pengadaan penyelengaraan pemanduan
6. Membantu dalam mendapatkan ijin operasi
7. Mempersiapkan dokumen yang diperlukan untuk pengadaan armada pendukung
8. Memonitor kegiatan production planning
9. Memonitor kegiatan loading – unloading
10. Memonitor kegiatan regasifikasi LNG menjadi gas
11. Melaksanakan kegiatan operasional penyandaran dan pelepasan LNG carrier
12. Mengawasi keselamatan pelayaran
13. Melaksanakan latihan – latihan keadaan darurat
14. Mengkoordinasikan kegiatan di FSRT Lampung dibantu oleh bagian yang terkait (misalnya Mooring master, Loading mastre, Mooring crew, Vessel support)
KUALIFIKASI
1. Pria
2. Pendidikan minimal ANT 1
3. Pengalaman serupa, minimal 5 tahun
4. Dapat berbahasa inggris dengan baik
5. Penempatan untuk di Jakarta dan Lampung
Silahkan kirimkan Surat Lamaran dan CV ke hrd@pgnlng.co.id dengan subject Marine Terminal Superintendent (MTS).

Lowongan migas di Halliburton, 5 posisi




Halliburton is one of the world’s largest providers of products and services to the oil and gas industries. The Company adds value through the entire lifecycle of oil and gas reservoirs and provides and integrates products and services, starting with exploration and development, moving through production, operations, and maintenance. Halliburton employs more than 80,000 people in over 80 countries. To support our operations in Indonesia we are seeking highly qualified candidates for the following positions:
Senior Mud Engineer / Fluid Engineer
Responsibilities:
• Under broad direction, provides well site service to customers of Baroid.
• Utilizes knowledge of company products and services in conjunction with experience in drilling fluid technology to optimize service quality.
• Based on interpreted results of routine and specialized testing, provides technical guidance of Baroid’s customized engineered fluids to maximize wellbore value.
• Complies with health, safety and environmental regulations in all aspects of job performance.
• Ensures that adequate inventories of palletized and bulk products are available at the rig site, based on the fluid program and anticipated conditions.
• Tracks material usage and maintains record of same for inventory and billing purposes.
• Maintains good working relationship with operator’s representative and rig personnel.
Requirements:
• Candidate must possess at least a Bachelor’s Degree in Engineering: Chemical, Mechanical, Mechatronic, Petroleum/Oil/Gas or equivalent.
• At least 3 years of working experience as MUD ENGINEER / DRILLING FLUID ENGINEER is required for this position.
• Excellent English Communication Skill
• Mud School Certified from qualifying trade school is preferred.
• Familiar with all types of drilling and completion fluids WBM and or NAF, specifically but not limited to: DIF, KCL PHPA inhibitive mud and coring fluids.
• Lectured in computer software.
Qualified candidates are invited to apply to http://www.rigzone.com/jobs/postings/360714/Mud_%20Engineer_Drilling_Fluid_Engineer.asp
Service Coordinator / Technical Professional / Services
Responsibilities:
• Under general supervision, responsible for selling the Industrial Drilling Products which deals with local market for tunneling drilling or others
Requirements:
• Candidate must possess at least an Engineering Bachelor’s Degree, and at least 2 years of working experience in any specification in oilfield, mining, tunelling, or construction business.
• Preferably experienced to manage both Operation and Client
• Abilities to recognize and solve problems independently
• Excellent english communication skill
Qualified candidates are invited to apply to http://www.rigzone.com/jobs/job_posting.asp?p_id=416524&iwsdf=3
Tubing Conveyed Perforating Engineer
Job Description:
• Provides Tubing Conveyed Perforating (TCP) job design, well support, and post job analysis to NWA/Country customers.
• Develops and maintains personal relationship with the technical customer base in designated area where at this level, assignments are generally well defined with clear and specified objectives.
• Has developed technical competence in one PSL and a general understanding of other PSLs.
• Performs assignments requiring knowledge and application of basic engineering principles.
• Works independently and may provide work direction to others at site.
Requirements:
• Candidate must possess at least a Bachelor’s Degree in Engineering
• Minimum 4 years of experience, two years in offshore and onshore as a TCP engineer and two years in technical customer support
• Excellent English Communication Skill
• Lectured in computer , both Microsoft office and familiar with software handling Perforation simulations
• Full understanding for Tubing Conveyed Perforating applications offshore and onshore
Qualified candidates are invited to apply to http://www.rigzone.com/Jobs/job_posting.asp?p_id=421118&iwsdf=3
Senior Service Coordinator / Senior Technical Professional
Responsibilities:
• Under general supervision, responsible for the development and implementation of the drilling fluids, completion fluids or Surface Solutions system recommendations, work process procedures and well bore management practices used in providing a complete well bore and waste management solution to the client.
• Provides primarily remote supervision of the Field Service Representatives or Service Supervisors assigned to his projects.
• Oversees the post-well audit process and is responsible for delivering to the client all information relevant to management of the well bore construction process
Requirements:
• Candidate must possess at least an Engineering Bachelor’s Degree.
• At least 10 years of working experience in the oilfield business specifically Drilling Fluid. International experience / assignment will be an advantage.
• Excellent English communication skill.
• Preferably experienced to manage both Operation and Client
• Experience in rig site drilling fluids, completion fluids or Surface Solutions management which includes experience in the administration of all sub product line specific rig site operations, application of critical thinking
• Abilities to recognize and solve problems independently, development of recommendations for Well bore and Waste Management procedures, oversight and optimization of the solids control equipment configuration.
• Supervised completion of the post-well audit, knowledge of the Halliburton SAP purchase order system, unsupervised completion of the post-well audit.
Qualified candidates are invited to apply to http://www.rigzone.com/jobs/job_posting.asp?p_id=419976&iwsdf=3
Tubing Conveyed Perforating Specialist
Job Description:
• Under general supervision, routinely works in more than one type of well site and base camp as assigned by Service Coordinator.
• Coordinates and oversees Tubing Conveyed Perforating (TCP) PSL functions at the well site and base camp.
• Provides the planning necessary for the job including equipment set up, well site direction, and customer-related support activities.
• Responsible for the activities relative to maintaining, setting up, testing, and operating equipment at the customer location and field camp.
• Promotes and takes an active part in the Quality Improvement Process.
• Ensures compliance with HSE regulations and guidelines.
• Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
• May help train service operators in areas of expertise.
• May monitor instruments and perform necessary calculations to assure quality of data/job.
• Consults with customers concerning services and products, promotes good customer relations at the well site, and assures customer satisfaction with results.
• Properly maintains assigned equipment and monitors compliance with safety regulations and procedures.
• Confer with Service Coordinator on major decisions.
Requirements:
• Candidate must possess at least an high school degree although a diploma degree is preferred.
• Minimum 6 years of experience in offshore and onshore as a TCP specialist
• Preferably experienced to manage both Operation and Client
• Abilities to recognize and solve problems independently
• Excellent English communication skill
• Full understanding for Tubing Conveyed Perforating applications offshore and onshore
• Lectured in computer, specifically Microsoft office
Qualified candidates are invited to apply to
http://www.rigzone.com/Jobs/job_posting.asp?p_id=421119&iwsdf=3

Selasa, 29 Oktober 2013

Lowongan migas di PT Donggi-Senoro LNG (“DSLNG”), 5 posisi


PT Donggi-Senoro LNG (“DSLNG”) is the first LNG Joint Venture project developed as a downstream business activity in Indonesia. DSLNG’s facility located in Uso, Banggai Regency of Central Sulawesi, has a production capacity of 2 Million tonnes of LNG per annum. Striving to be a world class facility, DSLNG is committed to becoming a safe and reliable provider of LNG.
To strengthen the team in DSLNG, we are looking for dynamic professionals to fill the following positions:
PAYROLL & ADMINISTRATION OFFICER
Basic Function:
• Conduct the preparation and assist in the preparation and payment of wages and salaries and maintenance of related records.
• Ensure preparation and distribution salaries and wages accurately and on time.
• Ensure the maintenance of pay records, associated time keeping data and statistics, leave records and related personnel information.
• Ensure assistance with maintenance of award data to ensure wages payments comply with awards, arbitrated decisions, and consent agreements.
• Guarantee the assistance in the processing of workers’ compensation claims.
• Guarantee payroll, payroll tax, insurance and super annulation payments and authorized payroll deduction are being reconciled.
• Implement QHSE regulation within his/her area of responsibility in order to minimize any possible risk and comply with company and government regulation

Requirement:
• Bachelor degree in accounting or any fields
• At least 3 years of experience in payroll area
• Knowledge of Tax PPh 21 & 26 SPM
• Knowledge of Accouting Journal Report
• Knowledge of Jamsostek

ENVIRONMENT OFFICER
Basic Function:
• Enforcing the HSE requirements, standards and instructions with emphasis on environmental aspects.
• Incorporate HSE instructions in routine orders and see that they are obeyed by all personnel working at the site.
• Ensuring compliance with AMDAL and UPL/UKL for Soil Cut and Fill.
• Liaise with QHSE Manager and develop a site specific HSE Plan in accordance with the overall HSE Management Plan.
• Review and endorse EPC Contractor’s site HSE plans.
• Establish and facilitate site safety meetings.
• Establish and improve site environmental management and monitoring system.
• Establish and improve incident reporting system.
• Establish and improve site guidance and awareness environmental training system.
• Periodically monitor construction activities and provide oversight and enforcement of the company’s and regulatory HSE requirements.
• Coordinate, administer, and maintain documentation of the HSE program in accordance with the company and regulatory requirements.
• Liaise with government bodies and professional organization on HSE matters especially concerning environmental matters.
• Manage relationship with third party hygiene and waste disposal service provider.
• Maintain comprehensive record and manage all statutory HSE reporting requirement on environmental aspect in particular.

Requirement:
• Bachelor degree in Environmental study or Engineering
• At least 5 years of experience as HSE officer on large scale construction projects out of which 3 years on environmental matters
• Experience on site development and marine construction preferred
• Possess professional qualifications and technical working knowledge of environmental requirements for large scale construction projects
• Knowledge of contractor HSE plan requirements

ELECTRICAL TECHNICIAN
Basic Function:
• Perform a variety of skilled tasks involved in the monitoring, inspection, diagnosis, and troubleshooting on electrical equipment, maintenance, repair, and servicing on field and shop equipment, components, facilities, and machinery associated within the production of LNG.
• Install, maintain, and repair electrical equipment and process control, including air and gas compressors and gas turbines used for power generation, hydraulic, and pneumatic systems, pumps, hydro mechanical system and related equipment and apparatus used in the production, treatment, storage and distribution of LNG to ensure production process is running well.
• Diagnose causes of electrical malfunction or failure of operational equipment and perform preventive and corrective maintenance to ensure the reliability of electrical equipment.
• Conduct routine inspections including visual checks and equipment monitoring; capture equipment repair status and reliability data; and enter into CMMS to ensure accurate data documentation.
• Coordinate various maintenance and production support activities, such as but not limited to prepare equipment for maintenance and monitor maintenance activities within production units to ensure proper safety interface.
• Communicate process equipment status, equipment availability and reliability issues with other personnel and shift personnel to provide accurate information.
• Adhere to Permit to Work procedures to ensure plant runs safely, reliably, and in support of all goals
• Read drawings and procedures in order to determine correct repair/calibration practices.
• Respond to process upsets and emergency situation, including firefighting, equipment isolation, de-pressuring, and evacuation to provide caution in emergency situation.
• Implement QHSE regulation within his/her area of responsibility in order to minimize any possible risk and comply with company and government regulation.

Requirement:
• Diploma in Electrical Engineering from college or university or Part Time Technical Courses or vocational.
• At least 5 years of experience involved in the Electrical Maintenance of a large industrial process plant.
Able to use precision and diagnostic instruments to measure, read and interpret plans, specifications, manuals and blueprints
• Able to use hand tools, pipe-threaders, taps, dies and measuring instruments

INSTRUMENT TECHNICIAN
Basic Function:
• Perform a variety of skilled tasks involved in the monitoring, inspection, diagnosis, and troubleshooting on instrument equipment, maintenance, repair, and servicing on field and shop equipment, components, facilities, and machinery associated within the production of LNG.
• Install, maintain, and repair instrument equipment and process control, including air and gas compressors and gas turbines used for power generation, hydraulic, and pneumatic systems, pumps, hydro mechanical system and related equipment and apparatus used in the production, treatment, storage and distribution of LNG to ensure production process is running well.
• Conduct routine inspections including visual checks and equipment monitoring (vibration, temperature, etc.); capture equipment repair status and reliability data; and enter into CMMS to ensure accurate data documentation.
• Coordinate various maintenance and production support activities, such as but not limited to prepare equipment for maintenance and monitor maintenance activities within production units to ensure proper safety interface.
• Communicate process equipment status, equipment availability and reliability issues with other personnel and shift personnel to provide accurate information.
• Adhere to Permit to Work procedures to ensure plant runs safely, reliably, and in support of all goals
• Read drawings and procedures in order to determine correct repair/calibration practices.
• Respond to process upsets and emergency situation, including firefighting, equipment isolation, de-pressuring, and evacuation to provide caution in emergency situation.
• Implement QHSE regulation within his/her area of responsibility in order to minimize any possible risk and comply with company and government regulation

Requirement:
• Diploma in Instrument Engineering from college or university or Part Time Technical Courses or vocational
• Able to use precision and diagnostic instruments to measure, read and interpret plans, specifications, manuals and blueprints
• Able to use hand tools, pipe-threaders, taps, dies and measuring instruments
• At least 5 years of experience involved in the Instrument Maintenance of a large industrial process plant

INSPECTOR
Basic Function:
• Monitor and to manage, on behalf of DSLNG, the plant deterioration, such as wall thickness of equipment and piping, painting, insulation and to suggest preventive, active or passive resolution to maintain the asset integrity
• Review and optimize the plant inspection plan, both risk based and condition based inspection work
• Finalize the risk based inspection plan and conditional inspection plan,
• Train the inspectors during commissioning phase
• Manage the initial measurements of equipment/piping system
• Monitor the deterioration of the plant and revise the inspection plan as needful.
• Maintain proper inspection and documentation for SKKP and SKPI renewal by getting an approval from GOI.
• Implement QHSE regulation within his/her area of responsibility in order to minimize any possible risk and comply with company and government regulation.

Requirement:
• Graduate with a BSc in metallurgy or mechanical Engineering
• Knowledge of applicable codes and standards for design and engineering purposes
• Belonging or have belonged to the international organization such as NACE
• Experienced with MIGAS for the certificate updates/extension

General requirement for all positions:
• Willing be on contractual basis
• Willing be on fixed pattern of work schedule
• Be proficient in oral and written English
• Work Location – Site Office, Central Sulawesi

The company will provide excellent remuneration and benefits package commensurate with qualification and experience. Please send your complete application letter, CV, recent photograph, current renumeration and expected renumeration to recruitment@donggi-senoro.com and put job title name and code as the email Subject (not more than 300kb). Only short listed Candidates will be contacted

Senin, 28 Oktober 2013

Lowongan migas di PT. Sumatera Persada Energi



PT. Sumatera Persada Energi is Oil and Gas Company engaged in the exploration and production of West Kampar Block, in onshore of Central Sumatera under PSC contract. Due to successful initial exploration effort, increasing exploration and development activities within the area, we are currently expanding our business and looking for highly qualified, competent and committed professional for Jakarta/ Riau office as:
1. OPERATION MANAGER (OM)
Work Location: Jakarta/Riau
Key accountabilities:
• Solid background in Production or Petroleum Engineering
• Strong exposure to field development planning and forecasting
• Strong knowledge and understanding of CAPEX
• Experienced developing and implementing SOP
• Ability to formulate and develop budgets and work programs
• Familiar with the business aspects of petroleum
• Proficient with computer application related (Word, Excel, Power Poin, etc)
• Willing to go/stay at well site when needed
Requirements
• Male, max 40-45 yrs
• BSc. Petroleum Engineering
• GPA > 3.00 from scale of 4.00
• 15+ years of strong oil and gas industry experience
• At least 5 years stay at field area
2. PRODUCTION ENGINEER (PE)
Work Location: Jakarta
Key accountabilities:
• Design artificial lift (PU) for new wells
• Initiate well service/ well repair for existing wells
• Production optimization of existing wells
• Monitoring production performance
• Mastering in troubleshooting on problem wells
• Design well stimulation (acid wash, paraffin , surfactant)
• Monitoring crude quality
• Monitoring performance of oil field chemical
• Production reporting to SKKMIGAS, daily basis
• Prepare lifting nomination (target lifting)
• Participate in meeting with SKKMIGAS, PSC, and coordination meeting
• Initiate to propose production equipment, process flow for new gathering station
• Participate in preparing WP&B, POD, POP
• Providing data to management and finance
• Willing to go/stay at well site when needed
Requirements:
• Male, max 32 yrs
• Bachelor degree, petroleum /mechanical engineer
• GPA > 3.00 from scale of 4.00
• Minimum 3 years experience in oil and gas company
• Good command in English
• Proficient with computer application
3. DRILLING SUPERVISOR (DE)
Work Location: Jakarta
Key accountabilities:
• Prepare, plans, program, costs, logistical, and schedules for drilling activities
• Proficient in drilling and service contracts, engineering design and well planning
• Monitoring drilling progress, oversee safety management and ensure the protection of the environment
• Must possess good management skill and experience in handling a drilling project
• An individual performer and a good team player
• Willing to go/stay at well site when needed

Requirements:
• Male, max 50 yrs
• Bachelor degree with subject in engineering, preferably in petroleum or mechanical
• GPA > 3.00 from scale of 4.00
• Minimum 7 years of experience in drilling covering from engineering and operational onshore operations
• APB III certified preferred
• Proficient in English (written and oral)
4. PROCUREMENT SPECIALIST (PS)
Work Location: Jakarta
Key Responsibilities:
• Mastering SKKMigas Regulations PTK 007
• Knowledgeable in All-purpose Oil and Gas Procurement Process
• Accountable for the development and maintenance of associated procurement forecast for service provision, supplier delivery and contract management.
• Technological Competencies of Project procurement Management, Expediting Materials, Procurement Process, and Contracting Process
• Language Proficiency – Excellent in English and Indonesian Language
• Computer Literacy
• Strong documentation
Requirements:
• Male/ Female, max 35 yrs
• Bachelor / Master of Engineering or Management
• GPA > 3.00 from scale of 4.00
• PTK 007 certified
• Having minimum 5 years being related experience in Oil & Gas Industry
5. EXECUTIVE SECRETARY (ES)
Work Location: Jakarta
Key Responsibilities:
• Have the ability:
- Meeting Minutes and Reports
- Administration skill related with Ms. Excel, Ms. Word, Power Point, and PDF
- Internet
- Booking tickets and accommodation
- Correspondence
- Documentation
- General reservations
• Honest, polite, conscientious, disciplined, responsible, Able to work hard and a “can do" attitude person
• Have a commitment to maintain confidentiality.
• Able to work under pressure
Requirements:
• Female, max 37 yrs
• Good personality and attractive appearance
• GPA > 3.00 from scale of 4.00
• D3 / Bachelor secretarial
• Experience as a secretary in the oil & gas companies at least 2 years
Please write in with a full resume, present and expected salaries and contact telephone numbers, together with any other relevant information and send it with job-code to: recruitment-spe@asiabumi.net

Lowongan migas di JOB Pertamina Medco E&P Tomori Sulawesi



Urgently Required
JOB Pertamina Medco E&P Tomori Sulawesi is a joint operating of PT Pertamina Hulu Energi and PT Medco E&P Indonesia. We are one of the national upstream Oil & Gas Company based in Jakarta, Indonesia. We are inviting highly dynamic, self-motivated and committed applicant to apply the following position in a challenging work environment with these qualifications:
Environment Engineer
• Bachelor degree in Environmental Engineering, or other related discipline
• Familiar with oil and gas industries in construction of oil and gas production facilities
• Capable in AMDAL complete process and other National regulatory requirements
• Knowledge on Corporate Social Responsibility (CSR) implementation and the interface to Environmental program
• Having minimum 10 years of experience in relevant field
GENERAL REQUIREMENTS
• Capable to use Microsoft Office, Internet and other computer office applications
• Good in English, both written and oral, is MANDATORY
• Good interpersonal and communication skills
• Strong leadership, well-organized, and detailed oriented
• Hard-working and loyal to achieving goals
• Capable to handle multi-tasking and work under pressure
Suitable candidate should submit an application letter together with comprehensive curriculum vitae, a recent photograph with maximum 500 kb of size to:
Human Resources Division
Email to: recruitment@job-tomori.com

Minggu, 27 Oktober 2013

Lowongan migas di PT. JETEC INDONESIA


PT. JETEC INDONESIA
Control System, Electrical & Telecommunications Integration in Engineering Company specialized in Oil & Gas Industry invite highly motivate Individual to fill vacant positions:
IT Programmer
Required Qualifications:
• D3 or S1 Technic University graduate.
• Excellent communication skills with a good level of written and spoken English.
• Good knowledge in C, C++, or Java programming.
• Preferably familiar with C++ Builder.


Please provide your Curriculum Vitae with Qualification, Education & Experience before Interview to: recruitment@actemium.co.id

Lowongan Migas di Tripatra, 9 posisi




TRIPATRA (www.tripatra.com) is reputable company in energy sector, has been operating in Indonesia for 40 years.
Since its establishment in 1973 Tripatra has consistently offered best solutions in energy industry. Our key strength is delivering high quality services in Engineering, EPC, O&M, and project management services to assist world-wide clients in various sectors: Oil & Gas, Downstream & Petrochemical, Mining, and Infrastructure.
Tripatra has strong, committed, and professional management team, fully supported by multidiscipline engineering workforce with high caliber national and multinational expertise.
Currently we searching potential candidates to filled positions as below:
A. DISCIPLINE ENGINEER:
1. Process Engineer
2. Mechanical Rotating Engineer
3. Mechanical Static Engineer
4. Piping & Layout Engineer
5. Piping Stress Engineer
6. Electrical Engineer
7. Instrument & Automation Engineer
8. Telecommunication Engineer
9. Offshore Structure Engineer

General qualification:
a. Min Bachelor Degree in engineering
b. Min 5 year experiences in design engineering for in Offshore Projects.
c. Capable in using design software related with each discipline, such as HYSYS, ETAP, INTOOLS, etc
d. Good in English both spoken and written.
Please kindly submit your CV to recruitment@tripatra.com, Cc to : budi.sinaga@tripatra.com Only shortlisted will be notified.

Sabtu, 26 Oktober 2013

Lowongan migas di Tripatra, 5 posisi


TRIPATRA (www.tripatra.com) is reputable company in energy sector, has been operating in Indonesia for 40 years.
Since its establishment in 1973 Tripatra has consistently offered best solutions in energy industry. Our key strength is delivering high quality services in Engineering, EPC, O&M, and project management services to assist world-wide clients in various sectors: Oil & Gas, Downstream & Petrochemical, Mining, and Infrastructure.
Tripatra has strong, committed, and professional management team, fully supported by multidiscipline engineering workforce with high caliber national and multinational expertise.
Currently we searching potential candidates to filled positions as below:
B. DESIGN DRAFTING
1. PDMS Designer
2. Electrical Draftsman
3. Instrument Draftsman
4. Telcom Designer
5. Telcom Draftsman

General qualification:
a. Min Senior Technical School
b. Min 5 year experiences for Designer, and 3 year experiences for Draftsman in design engineering of Offshore projects
c. Highly skilled in operate design software such as AutoCAD, etc
d. Good in English both spoken and written.


Please kindly submit your CV to recruitment@tripatra.com, Cc to : budi.sinaga@tripatra.com
Only shortlisted will be notified.

Lowongan migas di NES Global Talent Indonesia, 6 posisi



NES Global Talent Indonesia - An Oil and Gas Recruitment Consultants based in Jakarta and Head Office in Manchester UK which supplies some of the largest organizations in the world with high-quality technical and engineering experts and has supported the top names in oil & gas for over 30 years. Currently our client a multinational EPC company in Oil and Gas industry in Indonesia requires position as below:
1. Project Lead (Indonesian National)
Qualifications
• Bachelor Degree in Engineering
• Minimum of 10 years’ experience in engineering design, construction and project management for oil and gas handling offshore projects and/or facilities.
2. Lead/Senior Mechanical Engineer
Qualifications
• Bachelor Degree in Mechanical Engineering
• Minimum of 15 years’ experience in Oil and Gas company
3. Lead/Senior Piping Engineer
Qualifications
• Bachelor Degree in Mechanical Engineering
• Minimum of 15 years’ experience in Oil and Gas company
4. Senior Fabrication Engineer (Indonesian National)
Qualifications
• Bachelor Degree in Civil, Mechanical, Industrial Science Engineering
• Minimum of 10 years’ experience in Oil and Gas (onshore plant)
5. Project Engineer (Indonesian National)
Qualifications
• Bachelor Degree in Engineering
• Minimum of 8 years’ experience in engineering design, construction and project management for oil and gas handling projects and/or facilities.
• Shall have broad knowledge on multi disciplines engineering, internationally recognized codes & standards for engineering & construction, and work planning & scheduling.
• Shall have high skills on facilitation & coordination.
6. Process Engineer (Indonesian National)
Qualifications
• Bachelor Degree in Chemical Engineering
• Minimum of 6 years’ experience in Oil and Gas Company
Please submit your application with updated CV & recent photograph by e-mail to: recruiter@nesglobaltalent.com

Jumat, 25 Oktober 2013

Lowongan migas di BUMN PT WIJAYA KARYA (Persero) Tbk, 2 posisi




JOB VACANCY
PT WIJAYA KARYA (Persero) Tbk
PT Wijaya Karya (Persero) Tbk. as a leading company with EPC and Investment business in Energy, Industrial Plant, Oil & Gas and Infrastructure sectors with operations in Indonesia and Overseas are seeking talented Indonesian nationals to fill the following position:


















NO
QUALIFICATION
EDUCATION
EXPERIENCE
1
Plant Manager

Bachelor of Mechanical Engineering
1. Male
2. Minimum 5 years experience in Power Plant
3. Have experience as Plant Manager
4. Willing to be placed throughout the Companys operations
2
Investment Analyst
Bachelor of Engineering and Master of Finance / Strategic Management
1. Male
2. Minimum 5 years experience as investment Analyst
3. Familiar with financial management and feasibility study analysis
4. Willing to know the newest organizational system in macro and micro

Cover letter CV Photo & Scanned certificate can be sent max November 1st 2013 via email to : job-wika@wika.co.id Please mention the position applied in the subject of the email


Lowongan Migas di TRIPATRA, 2 posisi


TRIPATRA (www.tripatra.com) is reputable company in energy sector, has been operating in Indonesia for 40 years.
Since its establishment in 1973 Tripatra has consistently offered best solutions in energy industry. Our key strength is delivering high quality services in Engineering, EPC, O&M, and project management services to assist world-wide clients in various sectors: Oil & Gas, Downstream & Petrochemical, Mining, and Infrastructure.
Tripatra has strong, committed, and professional management team, fully supported by multidiscipline engineering workforce with high caliber national and multinational expertise.
If you would like to have bright future in Engineering sectors, then we offers you some of positions with following disciplines & qualifications :
Onshore Construction Superintendent (1 position - Site : Balongan)
Requirement:
• Minimum Bachelor degree majoring in Civil, Mechanical, Industrial Science Engineering with total experience in O&G min 15 years experience with 8 years experience in onshore plants and 5 years at Superintendent level.
• Work Location : Onshore O&G Balongan
• Could be join in November 2013

Onshore Fabrication Superintendent ( 2 position - Site : Handil )
Requirement:
• Minimum Bachelor degree majoring in Civil, Mechanical, Industrial Science Engineering with total experience in O&G min 15 years experience with 8 years experience in onshore plants and 5 years at Superintendent level.
• Work Location : Fabrication Yard – Handil
• Could be join in December 2013

Civil Field Engineer (1 position – site Balongan)
Requirement :
• Min Bachelor degree majoring in Civil Engineering with total experience in O&G min 5 years experience with 2 years experience in onshore plant
• Work Location : Onshore O&G Balongan
• Could be join at November 2013

Structural Field Engineer (1 position – site Balongan)
Requirement :
• Min Bachelor degree majoring in Civil Engineering with total experience in O&G min 5 years experience with 2 years experience in Fabrication Yard
• Work Location : Fabrication Yard – Handil
• Could be join in December 2013

HSE Engineer (2 position)
Requirement :
• Min Bachelor degree majoring in Engineering/K-3 with total experience in O&G min 7 years experience.
• Experience in set up/develop HSE procedures & implementation.
• Work Location : Fabrication Yard Handil & Site Balongan
• Could be join in November 2013


Please send your complete application letter, certificates, CV, recent photograph, and put job title name as the email subject to : budi.sinaga@tripatra.com

Kamis, 24 Oktober 2013

Lowongan Migas di RekindWorleyParsons, 10 positions


RekindWorleyParsons is a Joint Operation between PT. Rekayasa Industri & PT. WorleyParsons Indonesia and is currently providing engineering and construction management services for PT. Chevron Pacific Indonesia in Duri, under its engineering construction management contract. We are seeking qualified and highly motivated engineers from multiple disciplines to join an experienced team in a fast-paced environment.
1. Senior Design Engineer – Electrical
Work location: Jakarta
Roles and Responsibilities
• Prepare and complete discipline engineering design, coordinate Contractor’s activities in development of related discipline engineering deliverables.
• Provide technical consultation for Facility construction and commissioning, if it’s required by Company to support Company’s related projects.
• Work closely with Company’s user(s) during review sessions of deliverables.
• Provide mentoring on related engineering discipline aspects to Contractor’s Design Engineers to enhance their competency.

Qualification of Personnel
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 8 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities, with minimum 3 years of which at senior engineer position.
• The candidate shall have thorough knowledge on related engineering discipline and be proficient with related baseline software and codes/standards.
• The candidate shall have high mentoring & coaching skills.
• Eligible for Indonesia citizen, only.

2. Design Engineer – Electrical
Work location: Jakarta
Roles and Responsibilities
• Prepare and complete development of related discipline engineering deliverables.
• Provide technical consultation for Facility construction and commissioning, if it’s required by Company to support Company’s related projects.
• Work closely with Company’s user(s) during review sessions of deliverables.

Qualification of Personnel
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 3 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall have adequate knowledge on respective engineering discipline and capable to utilize with related baseline software and codes/standards.
• Eligible for Indonesia citizen, only.

3. Senior Drafter Mechanical
Work location: Jakarta
Roles and Responsibilities
• Development of design drawings by using CADD in accordance with their function and objective as directed by Contractor’s Designer.

Qualification of Personnel
• Minimum education is to possess an engineering diploma degree (D3) with 4 years working experience or senior high school graduate (SMU) with 8 years working experience, both in design drafting by using CADD.
• Minimum 3 years of which (with D3 degree) or 6 years of which (for SMU graduate), working for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall be skilled to use CADD baseline software: Intergraph Microstation version 8i.
• Eligible for Indonesia citizen, only.

4. Drafter Electrical
Work location: Jakarta
Roles and Responsibilities
• Development of design drawings by using CADD in accordance with their function and objective as directed by Contractor’s Designer.

Qualification of Personnel
• Minimum education is to possess an engineering diploma degree (D3) or equivalent, with 2 years working experience or senior high school graduate (SMU) with 4 years working experience, both in design drafting by using CADD.
• Minimum 1 year of which (with D3 degree) or 2 years of which (for SMU graduate), working for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall be skilled to use CADD baseline software: Intergraph Microstation version 8i.
• Eligible for Indonesia citizen, only.

5. Drafter Mechanical
Work location: Jakarta
Roles and Responsibilities
• Development of design drawings by using CADD in accordance with their function and objective as directed by Contractor’s Designer.

Qualification of Personnel
• Minimum education is to possess an engineering diploma degree (D3) or equivalent, with 2 years working experience or senior high school graduate (SMU) with 4 years working experience, both in design drafting by using CADD.
• Minimum 1 year of which (with D3 degree) or 2 years of which (for SMU graduate), working for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall be skilled to use CADD baseline software: Intergraph Microstation version 8i.
• Eligible for Indonesia citizen, only.

All applications are appreciated and will be treated confidentially. Only qualified, short-listed applicants will be invited for further process. If you find that your skill meet the requirement please send your resume in PDF to lica.rizawaty@rekindworleyparsons.com, with the title of applied position as email subject. Please don’t attach other document besides your own resume.

---------------------------------------------------------------------------------------------------------------------------

RekindWorleyParsons is a Joint Operation between PT. Rekayasa Industri and PT. WorleyParsons Indonesia and is currently providing Engineering and Construction Management services for PT. Chevron Pasific Indonesia in Duri, Riau under its Engineering and Construction Management Contract. We are seeking qualified and highly motivated engineers from multiple discipline to join and experienced team in a fast paced environment.
COST ESTIMATOR
Responsibilities
1) Perform cost estimating as part of the overall deliverable package for Customer
2) Prepare individual project Total Installed Cost (TIC) estimates at or above Class 3 (L: -10% - -20%; H: +10% - +30%) by using budgetary quotations for major equipment and by referring to historical data and/or appropriate cost benchmarks and/or professional judgment.
3) Work closely with Company and Company’s contractors during performance of cost estimating & control services for Company’s projects
4) Develop and maintain Contractor’s processes and procedures related with cost estimating & control.
5) Prepare detailed cost estimate for project execution covering all associated cost components (such as: detail engineering, construction, commissioning, equipment certification, construction management, procurement of goods & services, project overheads, etc.)

Requirements
1) The candidate shall have minimum 8 years working experience in cost estimating & control, with minimum 4 years of which are for oil & gas or petrochemical handling projects and/or facilities
2) The candidate shall have thorough knowledge on various cost estimating & control practices and related codes & standards, including associated software.
3) The candidate shall have thorough knowledge of local productivities, customs and labor practices and applicable local labor laws to the degree these have a material impact on TIC estimate.
4) The candidate shall have high skill for facilitation & coordination, and networking
5) Able to join immediately

SENIOR PROCESS ENGINEER
Responsibilities
• Prepare and complete process engineering design, coordinate Contractor’s activities in development of process engineering deliverables.
• Provide technical consultation for Facility construction and commissioning, if it’s required to support Company’s related projects
• Work closely with Company’s user(s) during review sessions of deliverables
• Provide mentoring on related process engineering aspects to Contractor’s Process Engineers to enhance their competency

Requirements
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 8 years working experience in process engineering works for oil & gas or petrochemical handling projects and/or facilities, with minimum 3 years of which at senior engineer position.
• The candidate shall have thorough knowledge on process engineering and be proficient with related baseline software (refer to Attachment A5) and codes/standards.
• The candidate shall have high mentoring & coaching skills.

DESIGNER (PROCESS & INSTRUMENTATION)
RESPONSIBILITES
• Discuss with Contractor’s Senior Engineer and/or Design Engineer with respective discipline, to determine number of drawings required for each specific project/work and to define function & objective of each drawing.
• Plan and prepare design sketches of Facility design in accordance with its function and objective as basis for development of design drawings.
• Direct and guide Senior Drafter and/or Drafter in development of design drawings with CADD.
• Conduct field data collection and verification to ensure drawing’s accuracy and completeness.

REQUIREMENTS
• Minimum education is to possess an engineering diploma degree (D3) with 8 years working experience or senior high school graduate (SMU) with 12 years working experience, both in design drafting by using CADD.
• Minimum 6 years of which (with D3 degree) or 9 years of which (for SMU graduate), working for oil & gas or petrochemical handling projects and/or facilities. =
• The candidate shall be familiar with design practices and engineering codes & standards in respective discipline.
• The candidate shall be fully conversant with CADD baseline software: Intergraph Microstation version 8i.
• Understand and has good capability with Process workflow (for Designer Process) and Instrumentation & Control (for Designer Instrumentation& Control)

SCHEDULER/PLANNER
Roles and Responsibilities
1. Perform project scheduling Services for Company’s projects both at individual or portfolio level which shall include but not limited to: development & update of project schedule (up to levei-4), collaboration with Contractor’s Project Controls Specialist to develop and update master schedule (resources loaded, WBS based), critical path identification in project schedule, etc.
2. Work closely with Company and Company’s contractors during performance of project scheduling services for Company’s projects.
3. Develop and maintain Contractor’s processes and procedures related with project scheduling.
4. Prepare detailed schedule for project execution covering all associated activities (such as: detail engineering, construction, commissioning, equipment certification, construction management, procurement of goods & services, etc.), interconnection among activities and determining critical path activities, by referring to historical data and/or appropriate duration benchmarks and/or professional judgment.

Qualification of Personnel
1. Minimum education is to possess an engineering degree (S I) with 8 years working experience or engineering diploma degree (D3) with 12 years working experience, both in construction execution and project scheduling.
2. Minimum 4 years of which (for SI degree) or 6 years of which (with D3 degree), working in oil & gas or petrochemical handling projects and/or facilities.
3. The candidate shall have broad knowledge on construction execution and thorough knowledge on various project scheduling methods and related codes & standards, including associated software.
4. The candidate shall have high skill for facilitation & coordination, and networking.

Senior Design Engineer & Engineer -Instrumentation and Control
Responsibilites:
• Prepare and complete Instrumentation and Control engineering design, coordinate Contractor’s activities in development of related discipline engineering deliverables
• Provide technical consultation for Facility construction and commissioning, if it’s required by Company to support Company’s related projects.
• Work closely with Company’s user(s) during review sessions of deliverables.
• Provide mentoring on related engineering discipline aspects to Contractor’s Design Engineers to enhance their competency.

Requirements:
• Minimum education is to possess an engineering degree (S1) or equivalent, preferably in Physics Instrumentation
• The candidate shall have minimum 8 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities, with minimum 3 years of which at senior engineer position. For Engineer position requires minimum 3 years experiences in Oil/Gas/Petrochemical industries.
• The candidate shall have thorough knowledge on related engineering discipline and be proficient with related baseline software (refer to Attachment A5) and codes/standards.
• For mechanical discipline, the candidate shall have suficient experience in providing technical specification & datasheet for procurement process, both for static or rotating equipment, and familiar with all associated codes & standards, such as: API610, API676, ASME-VIII Division 1/2, API650, etc.
• For piping discipline, the candidate shall have sufficient experience in implementing 3D modeling for piping design and familiar with 3D baseline software (PDMS and Naviswork Review).
• The candidate shall have high mentoring & coaching skills

For those who meet our qualifications above, please send your latest resume to ayu.anindita@rekindworleyparsons.com with subject: “Application for Instrumentation and Control” . Only shortlisted candidates will be notified

Lowongan Kerja Migas di PT Patra Badak Arun Solusi; 9 Positions

  LOWONGAN PEKERJAAN “KONTRAK PROJECT BASED” PT PATRA BADAK ARUN SOLUSI DIUTAMAKAN PENGALAMAN DI BIDANG OIL & GAS   I.  Project Manager ...