Oil and gas job vacancy at NES Global Talent

Oil and gas job vacancy at NES Global Talent


NES Global Talent Indonesia - An Oil and Gas Recruitment Consultants based in Jakarta and Head Office in Manchester UK which supplies some of the largest organizations in the world with high-quality technical and engineering experts and has supported the top names in oil & gas for over 30 years.

Currently our client a multinational operator company in Oil and Gas industry in Indonesia requires several positions for their FLNG project as below:

Instrument Engineer (Indonesian National)

Education:

• University degree or equivalent in Instrumentation and Control, Chemical, Mechanical or Electrical Engineering.

Responsibilities:

• A minimum 15 years experience in the oil and gas industry, as instrument and controls discipline with the instrument and control system design, construction and start-up of LNG plants as a minimum including ideally offshore oil and gas production platforms and facilities.
• Extensive experience in FEED & EPC engineering activities related to Instrumentation & Control system design of LNG/Offshore Oil and Gas production platforms and facilities.
Proficient knowledge and working experiences of instrument and control system design involved with all phases of projects from FEED to detail engineering and design through to construction, pre-commissioning and commissioning, project management and QC controls and procedures relating to instrumentation and control engineering.
• Knowledge and working experience of control and safety system design including instrument engineering (including flow metering & analyzer system) process control and safety instrumented system (ICCS), Fire and Gas system, HIPPS system, Package system and Asset Management system.
• Knowledge and experience with instrument and control design software.
• Familiarity with the related standards and codes.

Package Engineer (Indonesian National)

Education:

• Bachelor Degree in Mechanical Engineering.
• 8+ years in Package Equipment design for Oil and Gas industry plant projects, particularly LNG.

Responsibilities:

To provide technical evaluation and design review for Package Equipment in the Topside development.

1. Package Equipment Design
• Review Contractor s design and performance analysis for package equipment and make recommendations to Sr. Package Engineer.
• Endure floating life cycle considerations are taken into account.
• Co-ordinate footprints with structural engineering.
• Ensure that ancillary components are included in equipment design.
• Conduct material Compatibility assessment for rotating equipments with Material Specialist.
• Inform main decisions and changes in design of Package Equipment to Sr. Package Equipment Engineer.
2. Technical Assurance and Integrity
• Verify the technical integrity of critical package equipment design aspect, considering floating lifecycle issues.
• Review design calculation as required.
• Conduct performance and reliability assessment (i.e. shaft stress analysis) for proposed package equipments; identify means to improve performance and reliability (i.e. bearing type) if possible.
• Work with the Pre-Production Operation & Maintenance Group in the development of operation and maintenance philosophies, operating procedures and integrity management plans for package equipments.
3. Planning, Cost and Risk Management
• Request and review that detail cost estimation and schedule provided by Contractor.
• Identify long-lead items and ensure that purchase orders for these items are scheduled in due time to minimize delays.
• Monitor progress of Contractor work; inform possible delays and recommend appropriate solutions to Senior Package Equipment Engineer.
• Provide input to FLNG risk assessment and mitigation measures to Senior Static.
Equipment Engineer.
• Ensure compliance with all Project interfaces and supervise information exchange among relative section.
4. Contractor Management
• Ensure that Contractor provides complete technical documentation including analysis reports for Package Equipment.
• Identify scope and develop specifications for EPC phase.
• Ensure technical design documents review and proper comments/recommendation.
5. Contribution for team
• Participate in System Integration, peers reviews and other initiatives as required.
• Encourage commitment to continuous improvement and knowledge sharing among subordinates.

Static Equipment Engineer (Indonesian National)

Requirements:

• 8 + years in Static Equipment design for Oil and Gas industry plant projects particularly LNG.
• Bachelor Degree in Mechanical Engineering.

Responsibilities:

To provide technical evaluation and design review for Steel Structure in the Topside development.

1. Topside Static Equipment Assessment
• Coordinate analysis of structural aspect for Static Equipment in Topside design: analysis will include but not limited to:
› Static Equipment strength and stability of elements in Topside (i.e., fatigue, vibration and motion analysis).
› Impact of weight and centre of gravity.
• Review static equipment design provided Contractor and make recommendations, if necessary; design will cover, but not limited to:› Static equipment i.e., heat exchangers, vessels, columns and miscellaneous sump tanks.
• Ensure that ancillary components that are included in equipment design do not affect Topside s technical integrity and reliability.
• Review Material Compatibility assessment for Static Equipment.
• Provide technical content for EPC bidding process based on approved final design.
• Provide input data to FLNG Plot Plan Study, Fire and explosion risk analysis & FLNG Hazard Mitigation Plan and Risk Management Plant.
2. Technical Assurance and Integrity
3. Planning, Costs and Risk Management
4. Contractor Management

Piping Engineer

Requirements:

• Minimum BS in Mechanical Engineering.
• 8+ years in package Equipment design for Oil and Gas industry plant projects, particularly LNG.

Responsibilities:

To provide technical evaluation and design review for piping design in the Topside development.

1. Topside Piping Design Assessment
• Review/check and evaluate FEED Contractors piping design including 3D model for process/utilities modules and pipe racks etc, on Topside facilities.
• Ensure that final design in line with project specification and DEPs requirements along with project documentation.
• Identify scope and develop specifications for EPC phase based approval final piping design.
• Verify and evaluate design integrity of work and to ensure that FEED Contractors proposed solutions are technically sound.
• Conduct Material Compatibility assessment with Material Specialist.
• Ensure that detailed design meet Company and industry standards (quality, safety & others (as well as regulatory requirements).
• Evaluate FEED deliverables of Multi FEED for piping design.
• Assessment local content for piping material.
• Provide technical content for EPC bidding process based on approved final design.
2. Technical Assurance and Integrity
3. Planning, Cost and Risk Management
4. Contractor Management

Hull Outfitting Engineer (Indonesian National)

Requirements:

• Bachelor Degree in Mechanical Engineering, Marine or equivalent.

Responsibilities:

• Minimum of 3 years experience in Offshore Oil & Gas facility, particularly FPSO engineering/design/construction, and/or LNGG & VLCC engineering/design/procurement/construction.
• Experienced in either of FEED, detailed engineering, procurement, and construction of Offshore facilities.
• Experienced in development & review of technical specifications, drawings, data reports & other documentation such as technical requisitions.
• Experienced in various engineering studies & workshop like HAZOP, HAZID etc.
• Experienced in working in major exploration & production companies or EPC contractors.
• Experienced in development of Hull/Tank (including cargo tank/condensate tank),LQ including HVAC, all other Hull systems (e.g. Ballasting, Bilge etc) under upper deck, layout of piping, P&ID, inspection strategy.
• Knowledge of industry standards and codes (quality, safety and others).
• Classifications Society Regulation Knowledge of Major Oil & Gas Compact standards including DEPs Knowledge of Hull/Tank outfitting, Hull systems material selection & specification, painting material selection & specification Familiar with project safety management.

Topside Structure Engineer (Indonesian National

Requirements:

• Bachelor Degree in Mechanical/Civil Structural Engineering.

Responsibilities:

• 8+ years in Static Equipment design for oil and Gas plant projects, particularly LNG.
• Experienced in FEED, detailed engineering, fabrication in shop yard and construction/installation of large size module structure in onshore and offshore facilities including FPSO.
• Experienced in development and review of technical specifications, drawings, study reports, and other documentation such as technical requisitions.
• Experienced in preparation of technical bid packaged and evaluation of technical bids.
• Experienced in working in major exploration & production companies or EPC contractors.
• Experienced in handling of weight control CoG Knowledge of industry standards and codes (quality, safety, and others) including DEPs applicable to FPSO.
• Knowledge of stress and fatigue analysis as per dynamic loads Knowledge of structure design software such as SACS, USFOS, STAAD Pro, etc.
• Knowledge of corrosion protection system of structure Familiar with project safety management.
• Topside Structure Design Review/check and evaluate FEED Contractor s structural design for equipment structure and pipe racks etc. on topside.

• Ensure that topside structure meet industry quality standards as well as regulatory requirements Ensure that final design is in line with the project specifications and DEPs requirements along with project documentation Evaluate FEED deliverables of Multi FEED for topside structure.
• Technical Assurance and Integrity Review design calculations including stress and fatigue analysis, drawings and simulation models in order to verify accuracy of deliverables for topside structure design.
• Contractor Management Ensure that FEED Contractors provide proper progress reporting and complete documentation for topside structure design.

Please submit your application indicating position applied in the e-mail subject + Code: THR Enclosed your updated CV & recent photograph by e-mail at the latest on June 10th, 2012 to:

recruiter@nesglobaltalent.com

Lowongan Kerja Migas dan Pertambangan 2016

Cari Lowongan lain !!

Lowongan Kerja Migas 2016

Sudah Ribuan pencari lowongan kerja migas menggunakan infomasi kami. ikuti update kami via twitter di @lowonganmigas

LinkWithin

Related Posts Plugin for WordPress, Blogger...