Lowongan Migas di RekindWorleyParsons, 10 positions


RekindWorleyParsons is a Joint Operation between PT. Rekayasa Industri & PT. WorleyParsons Indonesia and is currently providing engineering and construction management services for PT. Chevron Pacific Indonesia in Duri, under its engineering construction management contract. We are seeking qualified and highly motivated engineers from multiple disciplines to join an experienced team in a fast-paced environment.
1. Senior Design Engineer – Electrical
Work location: Jakarta
Roles and Responsibilities
• Prepare and complete discipline engineering design, coordinate Contractor’s activities in development of related discipline engineering deliverables.
• Provide technical consultation for Facility construction and commissioning, if it’s required by Company to support Company’s related projects.
• Work closely with Company’s user(s) during review sessions of deliverables.
• Provide mentoring on related engineering discipline aspects to Contractor’s Design Engineers to enhance their competency.

Qualification of Personnel
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 8 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities, with minimum 3 years of which at senior engineer position.
• The candidate shall have thorough knowledge on related engineering discipline and be proficient with related baseline software and codes/standards.
• The candidate shall have high mentoring & coaching skills.
• Eligible for Indonesia citizen, only.

2. Design Engineer – Electrical
Work location: Jakarta
Roles and Responsibilities
• Prepare and complete development of related discipline engineering deliverables.
• Provide technical consultation for Facility construction and commissioning, if it’s required by Company to support Company’s related projects.
• Work closely with Company’s user(s) during review sessions of deliverables.

Qualification of Personnel
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 3 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall have adequate knowledge on respective engineering discipline and capable to utilize with related baseline software and codes/standards.
• Eligible for Indonesia citizen, only.

3. Senior Drafter Mechanical
Work location: Jakarta
Roles and Responsibilities
• Development of design drawings by using CADD in accordance with their function and objective as directed by Contractor’s Designer.

Qualification of Personnel
• Minimum education is to possess an engineering diploma degree (D3) with 4 years working experience or senior high school graduate (SMU) with 8 years working experience, both in design drafting by using CADD.
• Minimum 3 years of which (with D3 degree) or 6 years of which (for SMU graduate), working for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall be skilled to use CADD baseline software: Intergraph Microstation version 8i.
• Eligible for Indonesia citizen, only.

4. Drafter Electrical
Work location: Jakarta
Roles and Responsibilities
• Development of design drawings by using CADD in accordance with their function and objective as directed by Contractor’s Designer.

Qualification of Personnel
• Minimum education is to possess an engineering diploma degree (D3) or equivalent, with 2 years working experience or senior high school graduate (SMU) with 4 years working experience, both in design drafting by using CADD.
• Minimum 1 year of which (with D3 degree) or 2 years of which (for SMU graduate), working for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall be skilled to use CADD baseline software: Intergraph Microstation version 8i.
• Eligible for Indonesia citizen, only.

5. Drafter Mechanical
Work location: Jakarta
Roles and Responsibilities
• Development of design drawings by using CADD in accordance with their function and objective as directed by Contractor’s Designer.

Qualification of Personnel
• Minimum education is to possess an engineering diploma degree (D3) or equivalent, with 2 years working experience or senior high school graduate (SMU) with 4 years working experience, both in design drafting by using CADD.
• Minimum 1 year of which (with D3 degree) or 2 years of which (for SMU graduate), working for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall be skilled to use CADD baseline software: Intergraph Microstation version 8i.
• Eligible for Indonesia citizen, only.

All applications are appreciated and will be treated confidentially. Only qualified, short-listed applicants will be invited for further process. If you find that your skill meet the requirement please send your resume in PDF to lica.rizawaty@rekindworleyparsons.com, with the title of applied position as email subject. Please don’t attach other document besides your own resume.

---------------------------------------------------------------------------------------------------------------------------

RekindWorleyParsons is a Joint Operation between PT. Rekayasa Industri and PT. WorleyParsons Indonesia and is currently providing Engineering and Construction Management services for PT. Chevron Pasific Indonesia in Duri, Riau under its Engineering and Construction Management Contract. We are seeking qualified and highly motivated engineers from multiple discipline to join and experienced team in a fast paced environment.
COST ESTIMATOR
Responsibilities
1) Perform cost estimating as part of the overall deliverable package for Customer
2) Prepare individual project Total Installed Cost (TIC) estimates at or above Class 3 (L: -10% - -20%; H: +10% - +30%) by using budgetary quotations for major equipment and by referring to historical data and/or appropriate cost benchmarks and/or professional judgment.
3) Work closely with Company and Company’s contractors during performance of cost estimating & control services for Company’s projects
4) Develop and maintain Contractor’s processes and procedures related with cost estimating & control.
5) Prepare detailed cost estimate for project execution covering all associated cost components (such as: detail engineering, construction, commissioning, equipment certification, construction management, procurement of goods & services, project overheads, etc.)

Requirements
1) The candidate shall have minimum 8 years working experience in cost estimating & control, with minimum 4 years of which are for oil & gas or petrochemical handling projects and/or facilities
2) The candidate shall have thorough knowledge on various cost estimating & control practices and related codes & standards, including associated software.
3) The candidate shall have thorough knowledge of local productivities, customs and labor practices and applicable local labor laws to the degree these have a material impact on TIC estimate.
4) The candidate shall have high skill for facilitation & coordination, and networking
5) Able to join immediately

SENIOR PROCESS ENGINEER
Responsibilities
• Prepare and complete process engineering design, coordinate Contractor’s activities in development of process engineering deliverables.
• Provide technical consultation for Facility construction and commissioning, if it’s required to support Company’s related projects
• Work closely with Company’s user(s) during review sessions of deliverables
• Provide mentoring on related process engineering aspects to Contractor’s Process Engineers to enhance their competency

Requirements
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 8 years working experience in process engineering works for oil & gas or petrochemical handling projects and/or facilities, with minimum 3 years of which at senior engineer position.
• The candidate shall have thorough knowledge on process engineering and be proficient with related baseline software (refer to Attachment A5) and codes/standards.
• The candidate shall have high mentoring & coaching skills.

DESIGNER (PROCESS & INSTRUMENTATION)
RESPONSIBILITES
• Discuss with Contractor’s Senior Engineer and/or Design Engineer with respective discipline, to determine number of drawings required for each specific project/work and to define function & objective of each drawing.
• Plan and prepare design sketches of Facility design in accordance with its function and objective as basis for development of design drawings.
• Direct and guide Senior Drafter and/or Drafter in development of design drawings with CADD.
• Conduct field data collection and verification to ensure drawing’s accuracy and completeness.

REQUIREMENTS
• Minimum education is to possess an engineering diploma degree (D3) with 8 years working experience or senior high school graduate (SMU) with 12 years working experience, both in design drafting by using CADD.
• Minimum 6 years of which (with D3 degree) or 9 years of which (for SMU graduate), working for oil & gas or petrochemical handling projects and/or facilities. =
• The candidate shall be familiar with design practices and engineering codes & standards in respective discipline.
• The candidate shall be fully conversant with CADD baseline software: Intergraph Microstation version 8i.
• Understand and has good capability with Process workflow (for Designer Process) and Instrumentation & Control (for Designer Instrumentation& Control)

SCHEDULER/PLANNER
Roles and Responsibilities
1. Perform project scheduling Services for Company’s projects both at individual or portfolio level which shall include but not limited to: development & update of project schedule (up to levei-4), collaboration with Contractor’s Project Controls Specialist to develop and update master schedule (resources loaded, WBS based), critical path identification in project schedule, etc.
2. Work closely with Company and Company’s contractors during performance of project scheduling services for Company’s projects.
3. Develop and maintain Contractor’s processes and procedures related with project scheduling.
4. Prepare detailed schedule for project execution covering all associated activities (such as: detail engineering, construction, commissioning, equipment certification, construction management, procurement of goods & services, etc.), interconnection among activities and determining critical path activities, by referring to historical data and/or appropriate duration benchmarks and/or professional judgment.

Qualification of Personnel
1. Minimum education is to possess an engineering degree (S I) with 8 years working experience or engineering diploma degree (D3) with 12 years working experience, both in construction execution and project scheduling.
2. Minimum 4 years of which (for SI degree) or 6 years of which (with D3 degree), working in oil & gas or petrochemical handling projects and/or facilities.
3. The candidate shall have broad knowledge on construction execution and thorough knowledge on various project scheduling methods and related codes & standards, including associated software.
4. The candidate shall have high skill for facilitation & coordination, and networking.

Senior Design Engineer & Engineer -Instrumentation and Control
Responsibilites:
• Prepare and complete Instrumentation and Control engineering design, coordinate Contractor’s activities in development of related discipline engineering deliverables
• Provide technical consultation for Facility construction and commissioning, if it’s required by Company to support Company’s related projects.
• Work closely with Company’s user(s) during review sessions of deliverables.
• Provide mentoring on related engineering discipline aspects to Contractor’s Design Engineers to enhance their competency.

Requirements:
• Minimum education is to possess an engineering degree (S1) or equivalent, preferably in Physics Instrumentation
• The candidate shall have minimum 8 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities, with minimum 3 years of which at senior engineer position. For Engineer position requires minimum 3 years experiences in Oil/Gas/Petrochemical industries.
• The candidate shall have thorough knowledge on related engineering discipline and be proficient with related baseline software (refer to Attachment A5) and codes/standards.
• For mechanical discipline, the candidate shall have suficient experience in providing technical specification & datasheet for procurement process, both for static or rotating equipment, and familiar with all associated codes & standards, such as: API610, API676, ASME-VIII Division 1/2, API650, etc.
• For piping discipline, the candidate shall have sufficient experience in implementing 3D modeling for piping design and familiar with 3D baseline software (PDMS and Naviswork Review).
• The candidate shall have high mentoring & coaching skills

For those who meet our qualifications above, please send your latest resume to ayu.anindita@rekindworleyparsons.com with subject: “Application for Instrumentation and Control” . Only shortlisted candidates will be notified

Lowongan Kerja Migas dan Pertambangan 2016

Cari Lowongan lain !!

Lowongan Kerja Migas 2016

Sudah Ribuan pencari lowongan kerja migas menggunakan infomasi kami. ikuti update kami via twitter di @lowonganmigas

LinkWithin

Related Posts Plugin for WordPress, Blogger...