|
RekindWorleyParsons is a Joint Operation between PT. Rekayasa Industri
& PT. WorleyParsons Indonesia and is currently providing engineering
and construction management services for PT. Chevron Pacific Indonesia
in Duri, under its engineering construction management contract. We are
seeking qualified and highly motivated engineers from multiple
disciplines to join an experienced team in a fast-paced environment.
1. Designer Piping
Work location: Jakarta
Roles and Responsibilities
• Discuss with Contractor’s Senior
Engineer and/or Design Engineer with respective discipline, to
determine number of drawings required for each specific project/work and
to define function & objective of each drawing.
• Plan and
prepare design sketches of Facility design in accordance with its
function and objective as basis for development of design drawings.
• Direct and guide Senior Drafter and/or Drafter in development of design drawings with CADD.
• Conduct field data collection and verification to ensure drawing’s accuracy and completeness.
Qualification of Personnel
• Minimum education is to possess
an engineering diploma degree (D3) with 8 years working experience or
senior high school graduate (SMU) with 12 years working experience, both
in design drafting by using CADD.
• Minimum 6 years of which (with
D3 degree) or 9 years of which (for SMU graduate), working for oil
& gas or petrochemical handling projects and/or facilities.
• The candidate shall be familiar with design practices and engineering codes & standards in respective discipline.
• The candidate shall be fully conversant with CADD baseline software: Intergraph Microstation version 8i.
• Eligible for Indonesia citizen, only.
2. Designer Civil and Structural
Work location: Jakarta
Roles and Responsibilities
• Discuss with Contractor’s Senior
Engineer and/or Design Engineer with respective discipline, to determine
number of drawings required for each specific project/work and to
define function & objective of each drawing.
• Plan and prepare
design sketches of Facility design in accordance with its function and
objective as basis for development of design drawings.
• Direct and guide Senior Drafter and/or Drafter in development of design drawings with CADD.
• Conduct field data collection and verification to ensure drawing’s accuracy and completeness.
Qualification of Personnel
• Minimum education is to possess
an engineering diploma degree (D3) with 8 years working experience or
senior high school graduate (SMU) with 12 years working experience, both
in design drafting by using CADD.
• Minimum 6 years of which (with
D3 degree) or 9 years of which (for SMU graduate), working for oil
& gas or petrochemical handling projects and/or facilities.
• The candidate shall be familiar with design practices and engineering codes & standards in respective discipline.
• The candidate shall be fully conversant with CADD baseline software: Intergraph Microstation version 8i.
• Eligible for Indonesia citizen, only.
3. Senior Drafter Mechanical
Work location: Jakarta
Roles and Responsibilities
• Development of design drawings by
using CADD in accordance with their function and objective as directed
by Contractor’s Designer.
Qualification of Personnel
• Minimum education is to possess
an engineering diploma degree (D3) with 4 years working experience or
senior high school graduate (SMU) with 8 years working experience, both
in design drafting by using CADD.
• Minimum 3 years of which (with
D3 degree) or 6 years of which (for SMU graduate), working for oil &
gas or petrochemical handling projects and/or facilities.
• The candidate shall be skilled to use CADD baseline software: Intergraph Microstation version 8i.
• Eligible for Indonesia citizen, only.
4. Drafter Electrical
Work location: Jakarta
Roles and Responsibilities
• Development of design drawings by
using CADD in accordance with their function and objective as directed
by Contractor’s Designer.
Qualification of Personnel
• Minimum education is to possess
an engineering diploma degree (D3) or equivalent, with 2 years working
experience or senior high school graduate (SMU) with 4 years working
experience, both in design drafting by using CADD.
• Minimum 1 year
of which (with D3 degree) or 2 years of which (for SMU graduate),
working for oil & gas or petrochemical handling projects and/or
facilities.
• The candidate shall be skilled to use CADD baseline software: Intergraph Microstation version 8i.
• Eligible for Indonesia citizen, only.
5. Drafter Mechanical
Work location: Jakarta
Roles and Responsibilities
• Development of design drawings by
using CADD in accordance with their function and objective as directed
by Contractor’s Designer.
Qualification of Personnel
• Minimum education is to possess
an engineering diploma degree (D3) or equivalent, with 2 years working
experience or senior high school graduate (SMU) with 4 years working
experience, both in design drafting by using CADD.
• Minimum 1 year
of which (with D3 degree) or 2 years of which (for SMU graduate),
working for oil & gas or petrochemical handling projects and/or
facilities.
• The candidate shall be skilled to use CADD baseline software: Intergraph Microstation version 8i.
• Eligible for Indonesia citizen, only.
All applications are appreciated and will be treated confidentially.
Only qualified, short-listed applicants will be invited for further
process. If you find that your skill meet the requirement please send
your resume in PDF to lica.rizawaty@rekindworleyparsons.com, with the title of applied position as email subject. Please don’t attach other document besides your own resume.
----------------------------------------------------------------------------------------------------------
RekindWorleyParsons is a Joint Operation between PT. Rekayasa Industri
and PT. WorleyParsons Indonesia and is currently providing Engineering
and Construction Management services for PT. Chevron Pasific Indonesia
in Duri, Riau under its Engineering and Construction Management
Contract. We are seeking qualified and highly motivated engineers from
multiple discipline to join and experienced team in a fast paced
environment.
COST ENGINEER/ COST ESTIMATOR
Responsibilities
1) Perform cost estimating as part of the overall deliverable package for Customer
2)
Prepare individual project Total Installed Cost (TIC) estimates at or
above Class 3 (L: -10% - -20%; H: +10% - +30%) by using budgetary
quotations for major equipment and by referring to historical data
and/or appropriate cost benchmarks and/or professional judgment.
3)
Work closely with Company and Company’s contractors during performance
of cost estimating & control services for Company’s projects
4) Develop and maintain Contractor’s processes and procedures related with cost estimating & control.
5) Prepare detailed cost estimate for project execution covering all
associated cost components (such as: detail engineering, construction,
commissioning, equipment certification, construction management,
procurement of goods & services, project overheads, etc.)
Requirements
1) The candidate shall have minimum 10 years
working experience in cost estimating & control, with minimum 7
years of which are for oil & gas or petrochemical handling projects
and/or facilities
2) The candidate shall have thorough knowledge on
various cost estimating & control practices and related codes &
standards, including associated software.
3) The candidate shall
have thorough knowledge of local productivities, customs and labor
practices and applicable local labor laws to the degree these have a
material impact on TIC estimate.
4) The candidate shall have high skill for facilitation & coordination, and networking
5) Able to join immediately
SCHEDULER/PLANNER
Roles and Responsibilities
1. Perform project scheduling
Services for Company’s projects both at individual or portfolio level
which shall include but not limited to: development & update of
project schedule (up to levei-4), collaboration with Contractor’s
Project Controls Specialist to develop and update master schedule
(resources loaded, WBS based), critical path identification in project
schedule, etc.
2. Work closely with Company and Company’s
contractors during performance of project scheduling services for
Company’s projects.
3. Develop and maintain Contractor’s processes and procedures related with project scheduling.
4. Prepare detailed schedule for project execution covering all
associated activities (such as: detail engineering, construction,
commissioning, equipment certification, construction management,
procurement of goods & services, etc.), interconnection among
activities and determining critical path activities, by referring to
historical data and/or appropriate duration benchmarks and/or
professional judgment.
Qualification of Personnel
1. Minimum education is to possess
an engineering degree (S I) with 8 years working experience or
engineering diploma degree (D3) with 12 years working experience, both
in construction execution and project scheduling.
2. Minimum 4
years of which (for SI degree) or 6 years of which (with D3 degree),
working in oil & gas or petrochemical handling projects and/or
facilities.
3. The candidate shall have broad knowledge on
construction execution and thorough knowledge on various project
scheduling methods and related codes & standards, including
associated software.
4. The candidate shall have high skill for facilitation & coordination, and networking.
SENIOR DESIGN INSTRUMENTATION AND CONTROL
Responsibilities:
• Prepare and complete Instrumentation and
Control engineering design, coordinate Contractor’s activities in
development of related discipline engineering deliverables
• Provide
technical consultation for Facility construction and commissioning, if
it’s required by Company to support Company’s related projects.
• Work closely with Company’s user(s) during review sessions of deliverables.
• Provide mentoring on related engineering discipline aspects to Contractor’s Design Engineers to enhance their competency.
Requirements:
• Minimum education is to possess an engineering degree (S1) or equivalent, preferably in Physics Instrumentation
•
The candidate shall have minimum 8 years working experience in related
engineering discipline works for oil & gas or petrochemical handling
projects and/or facilities, with minimum 3 years of which at senior
engineer position.
• The candidate shall have thorough knowledge on
related engineering discipline and be proficient with related baseline
software (refer to Attachment A5) and codes/standards.
• For
mechanical discipline, the candidate shall have suficient experience in
providing technical specification & datasheet for procurement
process, both for static or rotating equipment, and familiar with all
associated codes & standards, such as: API610, API676, ASME-VIII
Division 1/2, API650, etc.
• For piping discipline, the candidate
shall have sufficient experience in implementing 3D modeling for piping
design and familiar with 3D baseline software (PDMS and Naviswork
Review).
• The candidate shall have high mentoring & coaching skills
ENGINEER INSTRUMENTATION & CONTROL
Responsibilities:
• Prepare and complete Instrumentation and
Control engineering design, coordinate Contractor’s activities in
development of related discipline engineering deliverables
• Provide
technical consultation for Facility construction and commissioning, if
it’s required by Company to support Company’s related projects.
• Work closely with Company’s user(s) during review sessions of deliverables.
• Provide mentoring on related engineering discipline aspects to Contractor’s Design Engineers to enhance their competency.
Requirements:
• Minimum education is to possess an engineering degree (S1) or equivalent, preferably in Physics Instrumentation
•
The candidate shall have minimum 3 years working experience in related
engineering discipline works for oil & gas or petrochemical handling
projects and/or facilities, with minimum 3 years of which at senior
engineer position.
• The candidate shall have thorough knowledge on
related engineering discipline and be proficient with related baseline
software (refer to Attachment A5) and codes/standards.
• For
mechanical discipline, the candidate shall have suficient experience in
providing technical specification & datasheet for procurement
process, both for static or rotating equipment, and familiar with all
associated codes & standards, such as: API610, API676, ASME-VIII
Division 1/2, API650, etc.
• For piping discipline, the candidate
shall have sufficient experience in implementing 3D modeling for piping
design and familiar with 3D baseline software (PDMS and Naviswork
Review).
• The candidate shall have high mentoring & coaching skills
SENIOR DRAFTER INSTRUMENTATION
Responsibilities:
Development of design drawings by using CADD
in accordance with their function and objective as directed by
Contractor’s Designer
Qualifications
• Minimum education is to possess an
engineering diploma degree (D3) with 4 years working experience or
senior high school graduate (SMU) with 8 years working experience, both
in design drafting by using CADD.
• Minimum 3 years of which (with
D3 degree) or 6 years of which (for SMU graduate), working for oil &
gas or petrochemical handling projects and/or facilities.
• The candidate shall be skilled to use CADD baseline software: Intergraph Microstation version 8i.
For those who meet our qualifications above, please send your latest resume to ayu.anindita@rekindworleyparsons.com. Only shortlisted candidates will be notified. |
|
