|
PT. SUPRACO INDONESIA
Jakarta based company with more than 33 years of experience in providing
services to oil and gas industry and Geothermal in Indonesia. We are
seeking for best candidates to fill the vacant position for our projects
1. Regulatory & Permit Site Interface (CP-A181)
RESPONSIBILITY AND DUTIES: • Onsite representative for all environmental, regulatory and permitting issues •
Coordinate ongoing efforts to identify and obtain various permits for
scope of work in a timely manner to comply with national, provincial and
local (Indonesian) rules and regulations • Interface with the E&R functional group to support project activities and implement best practices and lessons learned •
Work and participate with project team and functional group on
preparation of project support documents, such as Environmental
Management Plan (EMP), Waste Management Plan (WMP), Spill Prevention and
Response Plans (SPRP), protection of surface water and other related
studies for the project • Support in selecting third party consulting
services with respect to Oil Spill Response Plan (OSRP) preparation and
development in coordination with Functional group and Productions •
Interface with project engineering and construction resources on project
design and implementation details required to satisfy project permit
and environmental requirements • Develop Environmental Standard – e.g. stream crossing, erosion control, etc •
Coordinate development and submittal of EMCAPS deliverable for
regulatory compliance plan (RCP) and environmental management plan (EMP)
for project facilities • Supervise, monitor and review the plan of
the implementation environmental protection measure according to RKL and
RPL (environmental monitoring and management plan) during construction
which is performed by third party environmental consultants •
Interface and coordinate activities with E&R functional group, as
appropriate, on preparation of permitting plans and government
agencies/inspector interface • Review the RKL/RPL report for
socioeconomic issue developed by EPC Contractor prior submitting to
functional group in Development • Review and endorse EPC contractor
environmental and regulatory documents and deliverables, as prescribed
in project Coordination Procedure • Prepare project internal
environmental and regulatory stewardship reports, as well as external
reports required to satisfy Government or external financial institution
conditions/requests • Assist project team, as appropriate, on the
field inspection, special tasks and studies related to overall SH&E
and permitting requirements. • Support the E&R functional group
on Regframe implementation and implement regular environmental
compliance assessments as part of the OIMS requirements for the project.
• Ensure the implementation of the Upstream EMDC Environmental
Standard is adhered to appropriately and align with Corporate
Environmental guidance • Implement and assist training in environmental standard and technologies to EPC Contractor
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES: • Broad technical and SH&E skills with basic understanding of project management and SH&E functional work processes •
5+ years broad-based experience preferred, in environmental compliance
and impact mitigation related to oil and gas industry, processing and
transportation, with prior experience in one or more SH&E-related
disciplines • process, and in particular SH&E and OIMS deliverable requirements • Knowledge of EMDC strategies and key business drivers • Good interpersonal and communication skills • Knowledge of EMCAPS • Adaptable to changing priorities Placement : Cepu Site
2. Civil / Structural Inspector – Infrastructure Facilities (CP-A183)
RESPONSIBILITY AND DUTIES: • Oversee inspection of structural activities conducted at contractors and sub-contractors facilities. • Coordinate with other structural. • Review original material certificates for compliance to codes and specifications • Ensure testing, measuring, welding, and NDE equipment is fully calibrated and has current certification • Ensure storage and use of welding consumables is per manufacture”s recommendations and full certification • Review Contractor”s field inspection and test reports • Verify fabrication fit-up, alignment, and dimensional tolerances • Review welder qualifications certifications, and attend welder qualification • Verify Contractor, Subcontractor Quality management systems, plans, procedures, and processes are in place. • Implement project Construction Surveillance Program
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES: • Working Knowledge of: - Piping and pressure vessel codes and quality standards (E.g. AWS D1.1, CSA B51, ASME Section III, ASME B31.3, and ISO 9001) - Piping fabrication methods - Welding processes and NDE techniques including evaluation methods - Piping, Isometrics and shop Drawings • Trained to authorize work permits (e.g. hot work, confined space, etc.) • Good oral and written English language skills • Well versed in safe work practices • Demonstrated ability to communicate in multiple languages • Minimum fifteen (15) years experience in inspection of piping systems on major onshore construction projects. • Skills and experience in the development of commissioning and start-up budget,.
• Skills and experience in the development of manpower and vendor
support mobilization/demobilization plan and schedules, and the
development of lists of required commissioning and start-up spares,
consumables, first-fills, special tools, temporary equipment, etc.
Qualifications: • Bachelor degree in a related field is preferable and is a plus • Certificates in planning and budgeting from recognized institutions are preferable • Advance skill in project planning with Primavera and MS Project is a must • Advance skill in the computer application software required in the project (Word, PowerPoint, Excel, etc.) is a must • Advance skills in project estimating and budgeting is a must Placement : Cepu Site
3. E&I Construction Tech Foreman – Field Facilities (CP-A184)
RESPONSIBILITY AND DUTIES: • monitor construction and
fabrication of E&I activities conducted at Contractors /
Sub-Contractors facilities and in the field • Participate in receiving inspection of E&I items at site and monitor the preservation program for the same until hand over • Promote safety awareness and safe performance among project team members, including consultants and contractor personnel •
Support Construction Site Manager in monitoring and appraising the
contractor”s performance for safety, quality, cost, and schedule; ensure
that appropriate corrective actions are taken when needed • Verify physical progress • Monitor mechanical acceptance and start-up activities between operating unit and contractor •
Assist PMT in meeting OIMS expectations as required, especially OIMS
Element 2 (Risk Assessment), OIMS Element 3 (Facility Design &
Construction), OIMS Element 9 (Incident Investigation) and OIMS Element
10 (Community Awareness) • Review or assist in reviewing E&I QC documents such as QA plans and pre-commissioning procedures •
Jointly develop E&I inspection check lists or review the check
lists generated by the Contractor for compliance to project requirements •
Ensure quality processes are followed for instrument calibration at
contractor facilities and / or in the field for permanent project
materials and temporary test instruments / equipments used in E&I
construction works • Co-ordinate with Contractor and Quality on cable tray routing and installation inspection •
Monitor construction of electrical and instrumentation facilities and
ensure they are completed as per approved engineering documentation and
project specifications. • Witness installation of E&I control panels (both local and inside the control rooms) • Monitor and witness continuity and meggering inspection works for cables • Monitor cable laying works in trenches, through ducts and on cable trays • Monitor loop checks and review records for the same in accordance with technical requirements • Monitor construction and installation and testing of instrument tubing works •
Review Contractor”s field inspection and test reports and ensure that
inspections are carried out as per approved ITP requirements • Assist and co-ordinate with other disciplines on electrical motors installation and alignments • Interface, participate or co-ordinate in E&I pre-commissioning activities as required • Preparation of punch lists •
Verify Contractor / Subcontractor Quality management systems, plans,
procedures, and processes are in place. Implement project Construction
Surveillance Program.
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES: •
Minimum ten (10) year”s experience in inspection of E&I works on
major onshore construction projects out of which at least 3 years
experience senior E&I construction position • Experienced in
witnessing SAT (Site Acceptance Tests) and FAT (Factory Acceptance
Tests) of Electrical & Instrument control systems • Exposure to DCS instrumentation works and commissioning of the same • Thorough knowledge on International standards on E&I like IEC etc. • Knowledge on applicable Indonesian MIGAS regulations for E&I works is preferred • Well versed in safe work practices • Computer literate with experience in using MS Office suite for preparing reports and maintaining data basePlacement : Cepu Site
4. Civil Geotechnical Inspector – Infrastructure Facilities (CP-A185)
RESPONSIBILITY AND DUTIES: • Site supervision of ground investigation fieldworks contracts ensuring compliance with specification and common practice. • Inspect geotechnical instrumentation design and installation. • Site supervision of pile installation works including pile loading and integrity testing. • Evaluating recommended countermeasures for low strength soils in conctact with structural foundations. • Verify proper dam foundation slope stabilization and structures, including soil blending of native and borrow materials. • Site supervision of installation of of river water intake. • Supervision of earthworks placement and verification testing. • Verification dam contruction procedures are followed
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES: • Working Knowledge of:
o Soil Mechanics field tesing methods, including determining Vane Shear
Strengths in cohesive soils using ASTM D 2573 method and Cone
Penetration Test per ASTM D3441. o Testing of swelling and dispersive soils (E.g. Emerson class number, double hydrometer or Pinhold). o Rules and Regulations for Dam Safety and Dam Construction in Indonesia. o Seepage Analysis and Control for Dams (E.g. U.S. Army Corps of Engineers EM 110-2-1901) • Degree in Civil/Geotechnical/Geological Engineering. 15 years of relevant experience. • Proven design investigation and analysis of geotechnical civil engineering. • Well versed in safe work practices. • Demonstrated ability to communicate in multiple languages • Computer literate with experience in using MS Office suite for preparing reports and maintaining data base • Thorough understanding of applicable project specifications • Trained to authorize work permits (e.g. hot work, confined space, etc.) • Good oral and written English language skills Placement : Cepu Site
5. Environment, Regulatory & Socioeconomic Interface (CP-A186)
RESPONSIBILITY AND DUTIES: 1. Coordinate ongoing effort to
obtain various permits for EPC”s scope of work in a timely fashion in
order to remain in compliance with National, Province, and Local
regulations. 2. Interface with the functional groups as necessary
to access timely support for project activities, identify/implement best
practices and lessons learned 3. Work with PMT and Functional groups
to support development of documents such as oil spill response plan and
waste management plan. 4. Interface with project engineering and construction to ensure environmental and regulatory compliance. 5.
Coordinate development and submittal of EMCAPS regulatory compliance
and environmental management plans for project facilities 6. Work
with consultants, as necessary, to prepare and submit requisite
environmental, regulatory and socioeconomic impact assessments. 7.
Interface and coordinate activities with functional groups, as
appropriate, to develop and implement appropriate plans for interfacing
with Non-Governmental Organisations (NGO”s) and Government agencies.
8. Review and advise PMT about EPC contractor”s environmental,
regulatory and socioeconomic documents and deliverables, as prescribed
in project Coordination Procedure. 9. Prepare project internal
environmental, regulatory and socioeconomic stewardship reports, as well
as external reports required to satisfy Government or external
financial institution conditions/requests. 10. Assist project team,
as appropriate, on special tasks and studies related to overall
Environmental and Regulatory permitting requirements, and community
affairs at shore tie-in and offshore work sites. 11. Develop
amicable relationships to facilitate open communication and transparency
in processes and procedures with various Government offices (BPMIGAS,
Sea Com, etc) that are responsible for issuing recommendations and
approvals for regulatory and environmental permits. 12. Work closely with ITS to exploit full benefits of the work scope for which ITS has been contracted.
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES: •
Broad project management, technical and SH&E skills with good
understanding of working in a project setting and an ability to interact
amicably with various external stakeholders • 5+ years broad-based
experience preferred, with prior experience in one or more related
disciplines (i.e. Environmental, Regulatory and Socioeconomic) • Experience interfacing with NGO and other similar organisation • Knowledge of EMCAPS process, and in particular SH&E deliverable requirements • Knowledge of EMDC strategies and key business drivers •
Good interpersonal and communication skills in English and Bahasa
Indonesia. Ability to speak Jawanese is an additionally desirable
attribute. • Adaptable to changing priorities as focus of activity is expected to vary between the three disciplines. • Willingness to undertake business travel and/or field based short term assignments •
Ability to interact proactively in the Project”s interest, with EPC
contractor, local Government offices and local community in East Jawa
province. Placement : Jakarta
6. Document Controller (CP-A188)
RESPONSIBILITY AND DUTIES: • Perform records management and document control functions for contractor documents, equipment suppliers and site documents. • Receive, log, track, and distribute documents from EPC Contractor”s document control. • Identifying, categorizing, and processing document types in accordance with project procedures.
• Using excel worksheets for logging, tracking transmittals from
contractor to EMDC, equipment suppliers, Contractor to Cepu project, and
all outgoing transmittals. • Using excel worksheets for logging,
tracking transmittals from contractor to Cepu Project, equipment
suppliers, Contractor to Cepu project, and all outgoing transmittals. • Filing originals in accordance with proper file code assignment and maintaining files. • Transferring electronic files to Cepu LAN folders for Cepu project team accessibility. • Making requested copies and distribution for outgoing and internal transmittals.
• Obtain "received signature" transmittal from contractor document
control for documentation distributed to them and file original.
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES: • Minimum High School Graduate • Minimum 5 years working experience. • Significant knowledge in control of hard and electronic document control and information management system • Sound written and verbal communication skills with the ability to communicate at all organizational levels. • Successful track record in similar roles on very large international projects • Experience in implementing information management systems organization. • Computer literacy , English proficiency and development skillsPlacement : Jakarta
7. Mechanical Inspector (CP-A189)
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES: • S1 degree in Mechanical/ piping Engineering with 5 years experience • Applied process piping design & Corrotion prevention • Understand PFD and P&ID • Advance Knowledge of mechanic of material and machine elements • Advance knowledge in pump and pumping • Advance knowledge and skill in Hydraulic calculation & thermodynamic • Applied knowledge of Project Management • Capable in operating MS Office, MS Project • Fluent in English, written & spoken Placement : West Java
8. Socio-Economic Interface (CP-A190)
RESPONSIBILITY AND DUTIES: • Work with consultants, as necessary, to prepare and submit socioeconomic impact assessments and related study •
Interface with project engineering, MCL functional groups, construction
and EPC contractors, as appropriate, to ensure proper information is
conveyed and assisted by the suitable P&GA staff when communicating
with external stakeholders • Interface and coordinate activities with
MCL functional groups, as appropriate, to develop and implement
appropriate plans for interfacing with external stakeholders i.e. (but
not limited to) Non-Governmental Organizations (NGOs), Province and
Regional government agencies, and local communities • Supervise and
monitor the implementation of socioeconomic procedures and/or standards
(Upstream Socioeconomic Standard) to ensure that they comply with
company policies, Corporate Environmental Guidance, the approved AMDAL,
RKL, and RPL documents, and applicable regulatory
requirements/obligations. • Assist project team, as appropriate, on
special tasks and studies related to overall socio-economic impacts and
provide inputs on socioeconomic compliance status for the project •
Prepare project internal socio-economic stewardship reports, as well as
external reports required to satisfy Government or external financial
institution conditions/requests • Review the RKL/RPL report for
socioeconomic issue developed by EPC Contractor prior submitting to
functional group in MCL Development
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES: •
3+ years broad-based experience preferred, with prior experience in
disciplines of Environmental, Regulatory and Socioeconomic and project
experience • Minimum Bachelor Degree (S1) preferably from Environmental Engineering and Social science. •
Good interpersonal and communication skills in English and Bahasa
Indonesia. The ability to speak Javanese is an additionally desirable
attribute. • Adaptable to changing priorities and able to travel and/or relocated for field based assignments •
Ability to interact proactively in the Project”s interest, with EPC
contractor, local Government offices and local community in East Java
province Placement : Jakarta
9. Structural Inspector – Field Facilities
RESPONSIBILITY AND DUTIES: • Oversee inspection of steel
structural pre-fabrication and installation activities conducted at
contractors / sub-contractors facilities and at site • Assist in
structural material receiving inspections at site and review original
material certificates for compliance to codes and specifications where
required • Ensure traceability is maintained for the fabricated part as stated in the project specifications • Monitor and ensure the inspections are carried out to the required levels as mentioned in the ITPs • Witness the dimensional control inspections on the pre-fabricated and as well on the installed parts • Co-ordinate with other disciplines for interface activities, for example civil foundation interface with structural • Monitor the structural welding activities inclusive of fit up / dimensional control inspections • Monitor the contractor uses only qualified welders and follows the approved welding procedures • Witness NDT / review NDT reports as required • Final inspection, generate punch lists and follow up of the same for close out •
Verify Contractor, Subcontractor Quality management systems, plans,
procedures, and processes are in place. Implement Cepu project
Construction Surveillance Program. • Inspect / assist in monitoring structural painting activities • Witness bolt torque tightening of structural components •
Monitor quality, issue non-conformance reports when quality
deficiencies are noted and set in motion the corrective actions jointly
with contractor. Maintain the NCR data base for structural portion. • Prepare weekly or monthly quality reports to be submitted to Site verification lead.
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES: •
S1 or equivalent with minimum 10 years experience out of which at least
5 years working in an oil and gas on shore plant construction project
as senior structural inspector. Qualifications in welding inspection
preferred. • Familiar with international standards like ASCI, AWS
D1.1 etc. and industrial practices on structural fabrication and
installation inspection works • Knowledgeable on welding, NDT and painting activities and associated inspection • Familiar with structural dimensional checking using conventional and digital survey instruments • Able to understand and interpret Civil survey reports for co-ordinates / leveling / orientation • Understand torque tightening methods and inspection • Good interpersonal communication skills with fluency in Bahasa Indonesia and English • Computer literate familiar with MS Office suite for preparing official reports Placement : Cepu Site
10. Valve/Piping Inspector
RESPONSIBILITY AND DUTIES: • Oversee inspection of piping and welding activities conducted at contractors and sub-contractors facilities. • Coordinate with other structural and piping inspectors • Review original material certificates for compliance to codes and specifications • Ensure testing, measuring, welding, and NDE equipment is fully calibrated and has current certification • Ensure storage and use of welding consumables is per manufacture”s recommendations and full certification • Review Contractor”s field inspection and test reports • Verify fabrication fit-up, alignment, and dimensional tolerances • Review welder qualifications certifications, and attend welder qualification • Verify Contractor, Subcontractor Quality management systems, plans, procedures, and processes are in place. • Implement Cepu project Construction Surveillance Program
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES: • Working Knowledge of: - Piping and pressure vessel codes and quality standards (E.g. AWS D1.1, CSA B51, ASME Section III, ASME B31.3, and ISO 9001) - Piping fabrication methods - Welding processes and NDE techniques including evaluation methods - Piping, Isometrics and shop Drawings • Thorough understanding of applicable Cepu project specifications • Trained to authorize work permits (e.g. hot work, confined space, etc.) • Good oral and written English language skills • Well versed in safe work practices • Demonstrated ability to communicate in multiple languages • Minimum fifteen (15) years experience in inspection of piping systems on major onshore construction projects. Placement : Cepu Site
Please send your application to recruitment@supraco.com with detailed resume and recent photograph and put job title name and code on subject email.
|
|
|