GASCO is an operating Company engaged in the extraction of Natural Gas Liquids (NGL) from associated and natural gas.
With a process capability of 5,500 million standard cubic feet of feed
gas (MMSCFD) per day and producing 285,000 barrels of condensate, 4,500
tons of sulphur and 28,000 tons of NGL per day, GASCO is currently one
of the largest gas processing companies in the world.
GASCO”s industrial complex in Habshan, one of the biggest in the United
Arab Emirates, is now looking for qualified staff for the following
vacant positions:
1. Mechanical Engineer 2. Instrument and Control Engineer 3. Electrical Engineer 4. Mechanical Technician 5. Instrument Technician 6. Electrical Technician 7. Operator
Total vacant is more than 80 position
MECHANICAL ENGINEER
PURPOSE: To plan, supervise and coordinate all Maintenance
activities for GASCO Plant Mechanical equipment, to ensure availability
and reliability.
BACKGROUND: The Mechanical Engineer reports to the respective Maintenance Section Head.
Main areas of responsibility for this position consist of supporting the
preventive, corrective, troubleshooting, shutdown, and major &
minor maintenance activities on various types of mechanical static and
rotating plant equipment situated in designated plant site areas.
Contacts for this position would commonly be engineering and supervisory
personnel, supervision of assigned subordinates, HSE and Operations
personnel, materials department staff, plus contractor and outside
vendor employees. It is a major challenge to continuously ensure
reliability and availability of equipment under his assigned area, when
consideration is given to the ageing of plant, structures and equipment.
MAIN ACCOUNTABILITIES: • To ensure that all the plant and
pipelines” rotating and static equipment are maintained, improved and/or
replaced for optimum plant availability to meet the plant integrity
requirements. • To plan and coordinate Mechanical Maintenance activities with other departments and sections. • To conduct root cause analysis of equipment failures and non-scheduled shutdowns and recommend problem resolutions. • To ensure effective utilization of the Maximo system in managing Maintenance and Breakdown activities. •
To compile/provide input for preparation of division/department
Capital, Operating and 5-Year plan budgets, and monitor/control
expenditures. • To ensure that all the required materials, spares,
consumables, and tools are of the right quality and quantity, and
available on a continuous basis. • To participate in Risk Assessment exercises and prepare recommendations and guidelines to address the findings. • To enforce the implementation of GASCO Health, Safety, and Environment Management System (HSE-MS). • To ensure all the Maintenance activities are carried out in line with the requirements outlined by the GASCO PTW system. ,
MINIMUM REQUIREMENTS: • Bachelor”s degree (or higher) in Mechanical Engineering •
Must have minimum 6 years hands-on experience in Oil & Gas or
relevant industry involving Rotating Equipment troubleshooting,
overhauling and maintenance of Pumps, Compressors, and Turbines. Must
also have experience in Static Equipment maintenance (e.g.
vessels/tanks/exchangers, etc.). • Must have experience in Maintenance Planning, Material & Resource, and budget preparations.
• Since this position will be having direct subordinates and managing a
team, the preferred candidate must also have supervisory skills.
INSTRUMENT AND CONTROL ENGINEER
PURPOSE: To plan, lead and direct the maintenance activities of a
wide range of Control Systems in the assigned area, and coordinate
these activities with operations and other maintenance sections.
BACKGROUND: The Instrument & Control Engineer reports to the
Instrument & Control Section Head/ concerned Area Maintenance
Section Head.
Main areas of responsibility is controlling the preventive, corrective,
troubleshooting, shutdown and major and minor maintenance activities, on
various types of instrumentation and control systems, which are used
for managing process plant, advanced process control, static &
rotating equipment and custody transfer measurements in the plant. The
main challenges are to establish a more comprehensive back up and
software library for disaster recovery, due to the complexity and
variety of control systems of the plant, to ensure the smooth
integration of Instrument & Control sections, taking into account
the diverse types and ages of the equipment and resolve the obsolescence
and reliability issues of critical systems.
He is responsible for the control systems and a variety of Field
Instrumentation systems. The system monitors and controls Gas Process
Plants, Sulphur Units, Compressors, Power Generators, Gas Turbines and
Utility Plant.
MAIN ACCOUNTABILITIES • To coordinate the testing, repairing, calibration and trouble shooting of the Instrumentation Control systems.
• To provide field supervision over the execution of critical
maintenance activities of the equipment and ensure that the problems are
resolved with minimum down time. • To comply with Gasco Health, Safety and Environment Management System (HSE-MS). • To evaluate the manpower requirement for daily preventive, break down and shutdown maintenance prepare the job schedule. • To monitor the work order status for obstacles, and to re-schedule the task if required.
• To monitor and control spares inventory in coordination with
purchasing division by analyzing the stock level and rate of
consumption. • To ensure optimum utilization of the MAXIMO system for maintaining job history.
• To liaise with Mechanical and Electrical sections and establish a
seamless integration between operation and maintenance teams. • To prepare and review various maintenance performance reports such as Preliminary Failure and Root Cause Analysis Reports.
• To compile/provide input for preparation of division/department
Capital and Operating budgets and monitor annual expenditure budgets.
MINIMUM REQUIREMENTS • Bachelor Degree in Instrumentation Engineering • 7 Years Experience
ELECTRICAL ENGINEER
PURPOSE: To plan, supervise and coordinate all Maintenance
activities for GASCO Plant Electrical equipment, to ensure availability
and reliability.
BACKGROUND: The Electrical Engineer reports to the Electrical Section Head/ concerned Area Maintenance Section Head.
The main challenges are to ensure the availability and reliability of
electrical system/equipment, in view of equipment age, obsolescence, and
diverse range of manufacturers, to improve speed of diagnosis and
rectification of power failure situations, so as to reduce downtime and
to integrate new facility installations with existing electrical
systems, commission and tie-in with the existing electrical network,
considering the unknown performance characteristics of the integrated
system and equipment.
MAIN ACCOUNTABILITIES: • To plan and carry out the
Predictive/Reliability Centered Maintenance (RCM) programs like
Dissolved gas analysis, Partial Discharge test, etc. for condition
monitoring of all electrical equipment thereby ensure improved machine
availability and power system reliability. • To comply with GASCO Health, Safety and Environment Management System (HSE-MS) and also promote awareness among the staff. •
To conduct Internal Safety audit of the installations in the assigned
plants including camps with regards to Electrical equipment and develop
action plans for area maintenance engineers to take up corrective
measures. • To review periodic & shutdown work plans and integrate activities with other sections for their execution. •
Responsible for technological up-grading of obsolete equipment,
preparation & execution of Plant Change Requests (PCRs) for
modification in existing facilities. • To compile/provide input for
preparation of division/department Capital, Operating and 5-Year
budgets, and monitor/control expenditure. • To carry out detailed
engineering, prepare scope of work, technical evaluation and execution
for Capital, Extra Ordinary Maintenance (EOM) and Major Maintenance (MM)
activities. • To review the existing maintenance practices and
support implementation of innovative & modern methodologies for
enhanced productivity leading to improvement in MTBF. To ensure optimum
utilization of the CMMS (MAXIMO) system for maintaining job history and
data quality so as to ensure retrieval of quality information. • To perform High Voltage switching activities. •
To prepare method statements for critical jobs, verify electrical
procedures and instructions, plus scope of work for contract jobs and
service work orders. • To support CD for technical evaluation of bids and inspection of materials on receipt.
MINIMUM REQUIREMENTS: • Bachelor”s degree (or higher) in Electrical Engineering •
Must have minimum 6 years hands-on experience in Oil & Gas or
relevant industry involving Electrical distribution & protection
systems to include participation in PM maintenance activities. • Must have experience in Maintenance Planning, Material & Resource, and budget preparations.
• Since this position will be having direct subordinates and managing a
team, the preferred candidate must also have supervisory skills.
MECHANICAL TECHNICIAN
PURPOSE : To perform preventive, breakdown and shutdown mechanical maintenance activities of static and rotating equipment.
BACKGROUND : The Mechanical Technician reports to the Mechanical Supervisor.
His main areas of responsibility involve the maintenance of major
rotating equipment such as Gas Turbines, gas compressors, turbo
expanders, blowers, diesel prime movers, pumps, valves and fin fan
coolers.
MAIN ACCOUNTABILITIES: • To perform and participate in the
preventive, corrective and troubleshooting mechanical maintenance
activities of the plant equipment, Gas Turbines, Compressors and Pumps.
• To attend Toolbox meetings to establish scope of work activities such
as safety requirements permits to work, special tools and materials. • To operate, repair and perform functional testing of tackle and lifting equipment, to the recognized standards. • To comply with all company Health, Safety and Environment as well as Work Permit, policies and procedures.
• To troubleshoot, identify and isolate faulty components, on Rotating,
Gas Turbine and Compressor equipment, using P&IDs, manufacturers”
manuals, drawings and diagrams. • To identify spare parts required for maintenance work, from manufacturers” drawings and spare parts lists.
• To perform shutdown maintenance repair and overhaul on all rotating
and static equipment, including Gas Turbines, Compressors & Pumps.
• To participate in condition monitoring checks on machinery, and
notify any malfunctions or defects to the immediate supervisor. •
To be a member of the Engineering Emergency & Fire Backup 24 hour
roster team, for performing ship connection & disconnection and
safety support duties. • To observe operation of all equipment
during routine activities for abnormalities, and report any defects to
relevant Supervisor.
Having hands-on exposure on the following: • Preventive and/or
corrective maintenance of rotating & static equipments (e.g.
multi-stage pumps, compressors, gas/steam turbines, blowers, all types
of bearings & valves, mechanical seals assemby/disassembly, etc). • Must know usage of all measuring tools & knowledge of clearances • Alignment Techniques (must specify what techniques you actually did/actual hands-on exposure) • Must have knowledge & exposure in Permit to Work (PTW) systems • Familiar with HAZOP/HAZID, H2S and best Safety practices • Ability to fully read & interpret P&ID, Process Flow and other engineering drawings
MINIMUM REQUIREMENTS: • Diploma in Mechanical or equivalent Tech. Related • 4 Years Experience in the same field
INSTRUMENT TECHNICIAN
PURPOSE: To perform preventive, corrective and troubleshooting
maintenance, and testing of all Plant Instrument Process Monitoring,
Control Protective equipment.
BACKGROUND: Instrument Technician reports to the Instrument & Control Engineer.
Responsibilities include working with Digital Governor Controls, PLC
systems, Microprocessor controls and various conventional pneumatic
& electronic Instruments, all of which require the ability to read
& understanding engineering drawings such as P & IDs, loop
drawing, ladder logic and block & functional diagrams.
MAIN ACCOUNTABILITIES: • To perform preventive, corrective and diagnostic maintenance on the process control systems and control loops.
• To remove, dismantle, overhaul/repair and install electric,
pneumatic, electronic or hydraulic control system such as control valves
and actuators, recorders, measuring and recording instruments in the
field or in the workshop. • To perform preventive and emergency
maintenance on all equipment on site, as well as during machine
scheduled or unscheduled shutdowns. • To perform modification of
control circuits and/or control loops as per the plant change requests
and update all related plant drawings to reflect the actual changes.
• To assist other sections such as electrical, mechanical and workshop
in the repair and troubleshooting of their instrument and electronic
related systems and test equipment. • To perform upgrade and retrofitting of new control instruments to the existing panels in the field and main control room. • To comply with all company Health, Safety and Environment as well as Work Permit, policies and procedures.
• To input data into the MAXIMO maintenance system, such as work order
activities, materials and spares, failure reports and manpower
statistics. • To perform regular calibration and maintenance of all
safety, fire and gas equipment such as gas monitors, H2S monitors,
smoke detectors and heat detectors to conform to #6. • To
troubleshoot, repair, calibrate and test various types of process
control instruments and relay logic, which include pneumatic, electrical
and electronic instruments.
MINIMUM REQUIREMENTS: • HCT D./ATI/ Equivalent in Tech. or Related • 4 Years Experience in the same field
ELECTRICAL TECHNICIAN
BACKGROUND: The Electrical Technician reports to the Electrical
Supervisor/Senior Technician. He receives work assignments, briefing and
guidance from senior section and engineering personnel, and plans and
arranges the manpower and material assigned for the job and prepares
these for the day”s activities. He receives the PTW from the senior
section and engineering personnel and executes the job in a safe and
effective manner. He ensures that the High and Low Voltage equipment
released, is safe for normal operation and attends/requests toolbox
meetings wherever essential to ensure safe execution of a job.
MAIN ACCOUNTABILITIES: • To carry out preventive maintenance
activities based on Maximo work orders, and carry out skilled
maintenance, repair and testing of electrical equipment. • To participate in the assigned plant shutdown activities and ensure timely completion of job activities. • To isolate and energize LV and HV motors and accept electrical permit to work. • To comply with all company Health, Safety and Environment as well as Work Permit, policies and procedures. • To provide work direction and instruction to the contractor craftsman.
• To verify completed maintenance activities and ensure that the job is
performed as per requirement and complete the maintenance activity
sheet. • To collect technical data from the field if requested by senior technician/area engineer. • To provide On Job Training to meet Competency Based Training programs for UAE Nationalization. • To provide input for the preparation of Method statements and Initiate Near miss reports.
• To identify areas for improvement in the activities performed and
assist the senior section personnel to carry out modifications and
improvements to the system. • To carryout visual inspection and be
vigilant to identify any developing problem in the area assigned, and
report any problems to relevant supervisor. • To participate in Emergency Response duties as a team member.
MAIN CHALLENGES: • To ensure the integrity and reliability of electrical system/equipment, in view of equipment age and obsolescence.
MINIMUM REQUIREMENTS: • Diploma – Technical Related • 4 Years Experience
OPERATOR
PURPOSE: To operate and monitor process plant and facilities in the assigned area as per operating procedures and GASCO – HSE standards.
BACKGROUND: The Operator reports to the Shift Controller.
The Operator is responsible for the entire field operations of all
equipment in his assigned area, and types of equipment generally consist
of all or some of the following items: Pumps, compressors, turbines,
storage tanks, separators, furnaces, pipelines, columns/vessels, control
valves, block valves, loading arms and jetty equipment. He must also
respond immediately to plant process upsets/emergencies and safety
emergencies, which can include gas leaks and fires etc. He is normally
the first person to observe and react to any field equipment
abnormalities.
MAIN ACCOUNTABILITIES: • To communicate and follow instructions of the Shift Controller to carry out duties efficiently and safely. • To check process parameters and coordinate with the Senior Operator to correct any deviations. • To carryout routine checks on equipment for abnormalities and inform Superior for prompt action. • To prepare the plant / equipments for maintenance ensuring adherence to standards.
• To sign work permits, follow on-going jobs and monitor Contractors
activities ensuring adherence to safety regulations and procedures. • To operate outside machinery and related equipment safely and efficiently as per Company standards and instructions.
• To carry out duties as Auxiliary fireman or Site Safety Officer as
and when required during emergencies, as per the Facility Response Plan.
• To follow all relevant departmental policies, processes,
standard operating procedures and instructions so that work is carried
out in a controlled and consistent manner. • To receive chemicals,
maintain the stock/consumption register and prepare chemical batches
required for the process ensuring adherence to procedures. • To
ensure compliance to all relevant safety, quality and environmental
management policies, procedures and controls to guarantee employee
safety, legislative compliance, delivery of high quality
products/service and a responsible environmental attitude. • To prepare various key Performance Indicator commitment checklists for management perusal.
Having any or either of the following hands-on exposures/experience on Gas processing particularly NGL (Natural Gas Liquids): • Gas Sweetening – Sweetening Units – merox process, sulfrex process, Molecular Sieve-Mol sieves • Gas Separation • Gas Compression • Fractionation – Fractionation Train/Towers – De-ethanizer, De-propanizer, Debutanizer • Dehydration – Dehydration Unit – TEG, Glycol or PSA • Nitrogen Rejection – Cryogenic, Absorption process • Acid Gas Removal – Amine treating, Benfield process, PSA, Sulfinol process, etc. • NGL Recovery Units • Sulphur Recovery Units • H2S Removal Units •
Gas Inlet facilities – slug catcher, inlet separator, condensate
stripper; Fired heaters; heat exchangers; blowers; pumps; turbines &
compressors, turbo expanders • Must have knowledge & exposure in Permit to Work (PTW) systems • Familiar with HAZOP/HAZID, H2S and best Process Safety practices • Basic ability to read & interpret P&ID, Process Flow and other engineering drawings
MINIMUM REQUIREMENTS: • Secondary / ATI in Tech. or Related • 5 Years Experience in the same field
It is important that : if you submitting your candidacy for the Engineer positions, you should mention the following in your CVs: • Proof that you have held responsibilities similar to Supervisory duties (e.g. managing a team of technicians, etc.) • How many are reporting to you or how many are your direct reports/subordinates.
• The list of positions/titles (along with the numbers e.g.
Technicians/Assistants/Helpers) directly reporting to you or your team
that you are responsible in managing/supervising, because Engineer post
in GASCO are responsible in managing/supervising a team. If you
submitting your candidacy for Technician or Operator positions, you
should mention the following in your CVs: • Your specific duties & responsibilities,
• A clear list of all equipments you personally had hands-on
experience, It would also be appreciated if you can mention the brand,
type, make, model of the equipments.
To increase your chance to be successfully recruited by GASCO,
kindly prepare your best CV, strengthen your spirit, increase your skill
and english conversation proficiency.
Applications: If you are a qualified candidate and interested to
apply the above position, please submit your CV by visiting this link
for online application:
www.megarainfield.com
Campaign will be held tentatively within the month of July or August 2013,
Attractive Salary will be offered, Other Benefits include: • Furniture Purchase Allowance, • Housing Entitlement • Education Assistance, Per Child, for Maximum of 4 children. • Car Purchase Loan, Free of Interest. • Health Insurance, Employee, wife and childrens. • End of Services Benefits,
Kindly share this information to your colleagues,
|
|
|